High Flow 50 mm Vent Filter The Steridyne® VTF0.2 hydrophobic PVDF vent filter is a high flow, liquid rated, sterilizing-grade filter that meets the critical demands of the pharmaceutical, biotechnology and related industries. It provides the benefits of a filter which flows like a PTFE membrane, but with the inherent gamma stability of a PVDF membrane. The product is designed and purpose built for small-scale critical air and gas filtration applications. General Design •• 100% integrity tested during manufacture •• Individual serialized for optimum traceability in critical applications •• Unparalleled...

Product Specifications Materials of Construction Bacterial Retention Filter Membrane: PVDF (polyvinylidene fluoride) Downstream Support: PP (polypropylene) Capsule Housing: PP (polypropylene) Sealing Method: Thermal Bonding >107 cfu/cm2 retention of Brevundimonas diminuta per ASTM F838 All materials of construction listed above are animal component free and meet FDA standards for food contact per 21 CFR 177. Autoclave: 121 °C to 135 °C (15 to 30 psi, 1 to 2 bar), 30 to 60 minutes, ≥ 3 cycles. Gamma irradiation: 25 to 40 kGy once. Filters comply with European Commission Regulation No. 10/2011....

Ordering Information Sterile Option Filter Size Material Code vent filter Filter Grade Inlet/ Outlet Connections - Vent/ Drain Ports 0 33 = Hose barb (¼"-⅜") inlet/ outlet 3B = Hose barb (¼"-⅜") with filling bell drain ports 73 = ¾" sanitary (TC) flange inlet & hose barb (¼"-⅜") outlet 1 = One luer port with cap, inlet side 77 = ¾" sanitary (TC) flange inlet/outlet 7B = ¾" sanitary (TC) flange inlet with filling bell outlet Steridyne® is a registered trademark of Meissner Filtration Products, Inc. © 2017 Meissner Filtration Products, Inc. All rights reserved. CB2VTF 1.0 1001 Flynn Road • Camarillo,...