Brand: MELFORM Fully recyclable at the end of its operational life. Country of origin: ITALY Customs code: 39231090 Dimensions compatible with insulated containers THERMAX AP and CARGO 370 E Compatible with food contact Technology: blow moulding Warranty: 24 months Non-toxic internal liquids Guaranteed for use from: -30°C to +50°C. MANUFACTURING MATERIAL Polyethylene outer shell Eutectic plate Fresh Eutectic mixture Internal content INSTRUCTIONS FOR USE EUTECTIC PLATES Handle the plate for a short time. Do not keep the plate frozen in contact with body or soft tissues as there is a risk of cold burn. Keep the plate away from the body and out of the reach of children. Hold the plate upright with a cap in the upper area, or horizontally with the cap facing up. Do not place and use the plate with the cap facing down. Do not damage the plate and do not remove or tamper with the cap. Do not use the product if damaged. In case of liquid leakage, isolate the plate for subsequent disposal. At low temperatures and with the liquid solidified, the plate becomes very sensitive toshocks. Handle the plate very carefully. In case of contact of the liquid with food, dispose of the product. In case of ingestion of liquid, contact the nearest emergency room immediately. In case of contact of the liquid with the skin, rinse thoroughly with water. How to freeze AGA004 plates: • Place the plate in a freezer horizontally with the cap facing up or vertically with the cap in the upper area. • Do not place the plates on top of each other but leave a space of at least 4 cm between one plate and the other to allow the passage of air. • The plate is properly conditioned when the liquid inside is totally frozen. Shake the plate for verification. Do not use the plate before it is fully conditioned. • Conditioning the fresh plate +3°C for 24 hours at a temperature of at least -10°C. Via Savigliano 34 - 12030 Monasterolo di Savigliano (CN) Tel. +39