*mymedicalexpo

Catalogs
membraPure
Aquinity² P10

Aquinity² P10

Product catalog summary

Overview
The Aquinity² P10 system is designed to produce ultra pure water from tap water, achieving a quality of 0.055 µS/cm. It features a reverse osmosis (RO) module and a 10-liter storage tank, with a production rate of 8 L/h. The system includes a mixed bed cartridge for further purification and a flexible dispenser for water tapping. Automatic recirculation maintains water quality when not in use.

Technical Specifications

Ultrapure water quality: 0.055 µS/cm, Type I
Resistivity: 18.2 MΩ·cm
Total Organic Carbon (TOC): < 10 ppb (Reagent), < 3 ppb (Analytical)
Dispensing flow rate: 1.5 L/min
Productivity rate: 8 L/h
Bacteria: < 1 cfu/mL
Particulate: > 0.2 µm less than 1 particulate/mL
RNAse: < 1 pg/mL
DNAse: < 5 pg/mL
Dimensions, weight, power: 504 x 340 x 535 mm, 16-20 kg, 110-230 V

Feed Water Requirements

Type: Tap water
Conductivity: < 1400 µS/cm
Inlet pressure: 1.5 to 6 bar
Free chlorine: < 0.1 mg/L
Silt Density Index (SDI): < 3
pH: 3 to 9
Temperature: 5 to 25 °C

Configurations and Options

Available in Reagent and Analytical configurations
Volumetric dispensing with increments of 0.1 L
TOC monitoring for continuous organic content checks
Bench integrated (BI) and wall mounted configurations available

User Interface & Software

Touch screen monitor displays data and warnings
Self-diagnostic module reduces service time and costs
Trackable values up to 1 year

Consumables

Ultrapure Module MemPak LS (Life Science)
Ultrapure Module MemPak AL (Analytical)
UV lamp (185 nm/ 254 nm)
Vent filter for internal tank
Pretreatment Module ProPak R10
Final Filter, capsule 0.2 µm

Contact Information
membraPure GmbH, Wolfgang-Küntscher-Str. 14, 16761 Hennigsdorf, Germany. Tel.: +49 3302 - 201 20 0, [email protected], www.membrapure.de

Catalog excerpts

Aquinity² P10 Produces Ultra pure Water

Open the catalog to page 1

The Aquinity² P10 system is designed for the production of ultra pure water (0.055 µS/cm) out of tap water.

Open the catalog to page 3

The Aquinity² P10 system is equipped with a reverse osmosis (RO) to produce deionised water into the integrated 10 liter storage tank with a production rate of 8 L/h. In the next step the ultra pure water is produced with a combination of optimized mixed bed cartridge and can be tapped with a ﬂexible dispenser. If water is not used, automatic recirculation within the Aquinity² system ensures a permanent high quality of ultra pure water. All components of the Aquinity² are assembled in an especially designed housing. The system can be easily opened by removing the side panel to access the ultra...

Open the catalog to page 4

Storage Tank Final Filter Ultrapure Scheme shows ﬂowchart of Aquinity² P 10 Analytical TI.

Open the catalog to page 5

Technical Specifications * not possible to tap pure water ** with microbiological final filter

Open the catalog to page 6

Aquinity2 P10 is available in two configurations (Reagent & Analytical) to fit the specific requirements of ultrapure water quality for different applications.

Open the catalog to page 8

Options wall mounted conﬁguration To save valuable benchtop space the system can be ordered as wall mounted conﬁguration.The whole system can me mounted on the wall with inclined display. volumetric dispensing TOC monitoring (TI version) The TOC monitoring during production and intermittent measurements during non-use periods allows to check the organic content in water continously between 1 and 999 ppb. bench integrated (BI version) To save valuable benchtop space the Aquinity² can be ordered as BI conﬁguration. The system will be installed underneath the work bench and only the display and...

Open the catalog to page 9

Currently recorded data and warning messages will be displayed on the touch screen monitor. The software furthermore supports the user with a self-diagnostic module which reduced service time and costs. £3 Helping tools to maintain system

Open the catalog to page 10

* 190-0082 Final Filter to reduce Endotoxin, DNA + RNAse

Open the catalog to page 11

Made in Germany, Your trusted partner for more than 30 years [email protected] www.membrapure.de

Open the catalog to page 12

All MembraPure catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list