*mymedicalexpo

Astacus²

Product catalog summary

Overview
The Astacus² system is engineered for producing ultra pure water with a conductivity of 0.055 µS/cm, suitable for various scientific applications. It utilizes permeate from reverse osmosis or deionized water, processed through optimized mixed bed cartridges.

System Features

Automatic Recirculation: Ensures consistent high-quality water when not in use.
Easy Maintenance: Components like the ultra pure module, UV lamp, and ultrafiltration module are accessible by removing the side panel.
µS-Control: Monitors feed water conductivity to protect cartridges, rejecting water if conductivity is too high.

Technical Specifications

Water Quality: 0.055 µS/cm, Type I
Resistivity: 18.2 MΩ·cm
TOC Levels: < 10 ppb for Reagent, < 5 ppb for Life Science, < 3 ppb for Analytical
Productivity Rate: 2 L/min, 1.5 L/min for Life Science model
Bacteria and Particulate Levels: < 1 cfu/mL and less than 1 particulate/mL respectively
Dimensions and Power: 297 x 340 x 535 mm, 16 - 20 kg, 110 - 230 V

Feed Water Requirements

Type: Reverse osmosis or deionized water
Conductivity: < 10 µS/cm
Inlet Pressure: 0 to 1.5 bar
TOC: < 50 ppb
Temperature: 5 to 25 °C

Configurations

Available in Reagent, Analytical, and Life Science models, with optional TOC monitoring.
Bench Integrated (BI) and Wall Mounted configurations available to save space.

User Interface & Software

Touch screen monitor displays data and warnings.
Self-diagnostic module reduces service time and costs.
Tracks historical values up to 1 year.

Consumables

Ultrapure Module MemPak LS and AL, UV lamp, Ultrafiltration Module, Final Filter, and Disinfection Tablets available.

Contact Information
membraPure GmbH, Wolfgang-Küntscher-Str. 14, 16761 Hennigsdorf, Germany. Tel.: +49 3302 - 201 20 0, [email protected], www.membrapure.de

Catalog excerpts

Astacus² Produces Ultra pure Water

Open the catalog to page 1

The Astacus² system is designed for the production of ultra pure water (0.055 µS/cm) out of permeate from a reverse osmosis or deionised water.

Open the catalog to page 3

The ultra pure water is produced with a combination of optimized mixed bed cartridges and can be tapped with a ﬂexible dispenser. If water is not used, automatic recirculation within the Astacus² system ensures a permanent high quality of ultra pure water. All components of the Astacus² are assembled in an especially designed housing. The system can be easily opened by removing the side panel to access the ultra pure module, UV lamp and ultra ﬁltration module. The µS - control checks the conductivity of feed water to protect the cartridges against inappropriate feed water (black line). If conductivity...

Open the catalog to page 4

Final Filter rejected in case of poor feed water purge before tapping water Scheme shows ﬂowchart of Astacus² Life Science TI. Tap Water

Open the catalog to page 5

Technical Specifications * with Life Science model

Open the catalog to page 6

Astacus2 is available in different configurations (Reagent, Analytical & Life Science) to fit the specific requirements of ultra pure water quality for different applications. An optional TOC integrated sensor allows the user to monitor the TOC content permanently online.

Open the catalog to page 8

Options µS-control volumetric dispensing The µS-control checks the conductivity of feed water to protect the cartridges against inappropriate feed water. If conductivity is too high the water ﬂow will be rejected. Our dispenser allows the volumetric controlled dispensing of water with an increment of 0.1 L and a tap volume from 0.1 to 99 L. The system prevents overﬂow of containers and allows to dispense water without supervising. TOC monitoring (TI version) The TOC monitoring during production and intermittent measurements during non-use periods allows to check the organic content in water continously...

Open the catalog to page 9

User Interface & Software Currently recorded data and warning messages will be displayed on the touch screen monitor. The software furthermore supports the user with a self-diagnostic module which reduced service time and costs. Helping tools to maintain system Main Screen: The Software allows the user to see all information to use maintenance tool and track back historical values up to 1 year. Trackable values up to 1 year Warning of customer in case of over limit and service case

Open the catalog to page 10

Made in Germany, Your trusted partner for more than 30 years [email protected] www.membrapure.de

Open the catalog to page 12

All MembraPure catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list