OptiPrep²

OptiPrep²
1 / 12 PagesView full catalog

OptiPrep²

Product catalog summary
Overview: The OptiPrep² series is engineered to produce ultra pure water at a rate of 8 L/min from pretreated water using reverse osmosis or EDI². It incorporates prefilters, mixed bed filters, and scavenger cartridges to ensure high-quality water. An automatic recirculation system maintains water quality when not in use, and the µS-control monitors feed water conductivity to protect the system.
Technical Specifications: The OptiPrep² delivers ultra pure water with a quality of 0.055 µS/cm and a resistivity of 18.2 MΩ·cm. It supports a productivity rate of up to 20 L/min and maintains endotoxin levels below 0.001 EU/mL in the Life Science model. The system dimensions are 1250 x 250 x 850 mm, weighing approximately 70 kg, and it operates on 110 V - 230 V power.
Feed Water Requirements: The system requires reverse osmosis or deionized water with a conductivity of less than 10 µS/cm, an inlet pressure of 1.5 to 5 bar, and a temperature range of 5 to 25 °C.
Configurations: OptiPrep² is available in various configurations to meet specific ultra pure water quality needs, including Reagent, Analytical, Life Science, and their TI variants.
Dispensing System: The external dispenser allows volumetric control with increments of 0.1 L, supporting a tap volume from 0.1 to 99 L at a dispensing rate of 8 L/min. It prevents overflow and allows unsupervised dispensing.
User Interface & Software: The system features a touch screen monitor displaying data and warnings. It includes a self-diagnostic module to reduce service time and costs, and tracks historical values for up to one year.
Consumables: Various consumables are available, including activated carbon filters, mixed bed cartridges, scavenger modules, UV lamps, ultrafiltration modules, and end filters.
Contact Information: membraPure GmbH, Wolfgang-Küntscher-Str. 14, 16761 Hennigsdorf, Germany. Tel.: +49 3302 - 201 20 0, Email: [email protected], Website: www.membrapure.de
See more

Catalog excerpts

OptiPrep²-1

Optiprep² Ultra Pure Water systems with High output of up to 8 L/min

 Open the catalog to page 1
OptiPrep²-3

The series of OptiPrep2 is designed for the production of 8 L/min of ultra pure water out of pretreated water by reversed osmosis or EDP. H

 Open the catalog to page 3
OptiPrep²-4

The ultra pure water is produced with a combination of prefilters, mixed bed filter and scavenger cartridge. If water is not used, automatic recirculation within the system ensures a permanent high quality of ultra pure water. All components of the OptiPrep² series are assembled in an industrial design for easy access. The µS - control checks the conductivity of feed water to protect the cartridges against inappropriate feed water (black line). If conductivity is too high the water flow will be reje

 Open the catalog to page 4
OptiPrep²-5

Scavenger filter rejected in case of poor feed water Tap of ultra pure water purge before tapping water Pump Scheme shows flowchart of OptiPrep² Life Science TI.

 Open the catalog to page 5
OptiPrep²-6

Technical Specifications * feeded with EDI water quality **with Life Science model dimensions, weight, power:

 Open the catalog to page 6
OptiPrep²-8

Configurations T h e s e t u p s o f O p t i P r e p ² a r e a v a i l a b l e i n d i f f e r e n t c o n fi g u ra t i o n s to fit the specific requirements of ultra pure water quality for different applications. Life Science

 Open the catalog to page 8
OptiPrep²-9

external dispenser memTap HF „High Flow“ Our dispenser allows the volumetric c o n t ro l l e d d i s p e n s i n g o f w a t e r w i t h a n increment of 0.1 L and a tap volume from 0.1 to 99 L and a dispensing rate of 8 L/min. The system prevents overflow of containers and allows to dispense water without supervising. prefilter filter with activated c a r b o n to a d s o r b organic contaminants in ultra pur

 Open the catalog to page 9
OptiPrep²-10

User Interface & Software Currently recorded data and warning messages will be displayed on the touch screen monitor. The software furthermore supports the user with a self-diagnostic module which reduced service time and costs. Helping tools to maintain system Main Screen: The Software allows the user to see all information to use maintenance tool and track back historical values up to 1 year. Trackable values up to 1 year Warning of customer in case of over limit and service case

 Open the catalog to page 10
OptiPrep²-12

Made in Germany Your trusted partner for more than 30 years [email protected] www.membrapure.de

 Open the catalog to page 12
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.