Series of AquaRO² & EDI²
16Pages

{{requestButtons}}

Catalog excerpts

Series of AquaRO² & EDI² - 1

Series of AquaRO2 & EDI2 Produces Pure Water in 3 different levels of water quality

Open the catalog to page 1
Series of AquaRO² & EDI² - 2

production of pure water (10 pS/cm to 0.2 pS/cm) out of tap water.

Open the catalog to page 2
Series of AquaRO² & EDI² - 4

The series of AquaRO², AquaRO²DI and EDI² are based on a reverse osmosis (RO) unit to produce deionised water. The EDI² series further processes the osmosis water by using an EDI cell to get type II water. The advantages of both series is the flexibility in terms of configuration. A production rate of 8 to 40 L/h in three different degrees of pure water (10 µS/cm to 0.2 µS/cm) is available. Optionally the systems can be equipped with a dispenser. The customer can optinally choose a 35 L or 70 L tank or individual. All components of the AquaRO² and EDI² series are assembled in an especially...

Open the catalog to page 4
Series of AquaRO² & EDI² - 5

Flowcharts of AquaRO² series / Page 5 Scheme shows Flowchart of setup AquaRO², which forms simultaneous the basis for AquaRO² & EDI² series.

Open the catalog to page 5
Series of AquaRO² & EDI² - 6

Flowcharts of AquaRO² DI series / Page 6

Open the catalog to page 6
Series of AquaRO² & EDI² - 7

Flowcharts of AquaRO² series / Page 7 Final Filter Pump Storage Tank

Open the catalog to page 7
Series of AquaRO² & EDI² - 8

Flowcharts of AquaRO² DI series / Page 8 Final Filter Pump Storage Tank

Open the catalog to page 8
Series of AquaRO² & EDI² - 9

Flowcharts of EDI² series / Page 9 Flowchart of EDI² 10 & EDI² 20 Outlet Flowchart of EDI² 40 Outlet softened Water

Open the catalog to page 9
Series of AquaRO² & EDI² - 10

Technical Specifications dimensions, weight, power (except AquaRO2 40 and EDI2 40): AquaRO2 : 504 x 340 x 535 mm, 16 to 20 kg, 110 V - 230 V ED|2 : 504 x 340 x 535 mm, > 40 kg, 110 V - 230 V

Open the catalog to page 10
Series of AquaRO² & EDI² - 12

The series of AquaRO2 and EDI2 are available in different configurations with different levels of production rate of pure water. This allows to fit the specific requirements of pure water quality for different applications.

Open the catalog to page 12
Series of AquaRO² & EDI² - 13

Options upgrade volumetric dispensing TOC monitoring (only for EDI²) Our dispenser allows the volumetric controlled dispensing of water with an increment of 0.1 L and a tap volume from 0.1 to 99 L. The system prevents overflow of containers and allows to dispense water without supervising. The TOC monitoring during production and intermittent measurements during non-use periods allows to check the organics in water continously. The TOC value is measured with a detection limit of 1 ppb and can be shown in the display to monitor organic impurities. Final Filter Upgrade with dispenser bench...

Open the catalog to page 13
Series of AquaRO² & EDI² - 14

Helping tools to maintain system Warning of customer in case of over limit and service case

Open the catalog to page 14
Series of AquaRO² & EDI² - 15

Pretreatment Module ProPak R10 Reverse Osmosis (RO) Module

Open the catalog to page 15
Series of AquaRO² & EDI² - 16

Made in Germany, more than 25 years... info@membrapure.de www.membrapure.de

Open the catalog to page 16

All MembraPure catalogs and technical brochures

  1. Aquinity² P10

    12 Pages

  2. Astacus²

    12 Pages

Archived catalogs