1. Catalogs
  2. membraPure
  3. Water Purification System Aquinity² P10

Water Purification System Aquinity² P10

Water Purification System Aquinity² P10
1 / 12 PagesView full catalog

Water Purification System Aquinity² P10

Product catalog summary
Overview: The Aquinity² P10 system is designed to produce ultra pure water (Type I, 0.055 µS/cm) from tap water. It features a reverse osmosis (RO) module and a 10-liter storage tank, with a production rate of up to 10 L/h. The system includes a mixed bed cartridge for ultra pure water production and a flexible dispenser for easy access.
Technical Specifications: The system delivers ultra pure water with a quality of 0.055 µS/cm and 18.2 MΩ·cm, meeting ASTM Type I standards. It has a dispensing flow rate of 1.5 L/min and a productivity rate of up to 10 L/h. The system ensures low levels of bacteria, pyrogens, particulates, RNAse, and DNAse. Dimensions are 340 x 510 x 540 mm, weighing 16-20 kg, and it operates on 110-230 V.
Feed Water Requirements: The system requires tap water with a conductivity of less than 2000 µS/cm, inlet pressure between 1.5 to 6 bar, free chlorine below 0.1 mg/L, an SDI of less than 3, and a pH range of 3 to 9. The temperature should be between 5 to 35 °C.
Configurations and Options: The Aquinity² P10 is available in Reagent and Analytical configurations. It can be installed as a bench-integrated (BI) version or wall-mounted to save space. The system features volumetric dispensing and TOC monitoring for continuous quality checks.
User Interface & Software: The system includes a touch screen monitor displaying data and warnings. It supports self-diagnostics to reduce service time and costs, and tracks historical values for up to one year.
Consumables & Spare Parts: Key components include the Ultra pure Module MemPak, UV lamp, vent filter, Pretreatment Module ProPak R10, and Final Filter. These parts ensure the system's optimal performance and longevity.
Contact Information: For further details, contact membraPure GmbH at Wolfgang-Küntscher-Str. 14, 16761 Hennigsdorf, Germany, or visit www.membrapure.de.
See more

Catalog excerpts

Water Purification System Aquinity² P10-1

Aquinity² P10 Produces ultra pure water from tap water

 Open the catalog to page 1
Water Purification System Aquinity² P10-3

The Aquinity2 P10 system is designed for the production of ultra pure water (Type I, 0.055 pS/cm)

 Open the catalog to page 3
Water Purification System Aquinity² P10-4

The Aquinity² P10 system is equipped with a reverse osmosis (RO) to produce deionised water into the integrated 10 liter storage tank with a production rate uo to 10 L/h. In the next step the ultra pure water is produced with a combination of optimized mixed bed cartridge and can be tapped with a flexible dispenser. If water is not used, automatic recirculation within the Aquinity² system ensures a permanent high quality of ultra pure water. All components of the Aquinity² are assembled in an especially designed housing. The system can be easily opened by removing the side panel to access the...

 Open the catalog to page 4
Water Purification System Aquinity² P10-5

Storage Tank Final Filter Ultra pure Scheme shows flowchart of Aquinity² P 10 Analytical TI.

 Open the catalog to page 5
Water Purification System Aquinity² P10-6

Technical Specifications 1 under appropriate operating conditions, typically < 3 ppb * not possible to tap pure water ** with microbiological final filter + with dispenser 340 x 590 x 750 mm

 Open the catalog to page 6
Water Purification System Aquinity² P10-7

1 Feed water with high conductivity can affect the RO product water quality For further information, please contact us.

 Open the catalog to page 7
Water Purification System Aquinity² P10-8

Aquinity2 P10 is available in two configurations (Reagent & Analytical) to fit the specific requirements of ultra pure water quality for different applications.

 Open the catalog to page 8
Water Purification System Aquinity² P10-9

Options TOC monitoring (TI version) volumetric dispensing The TOC monitoring during production and intermittent measurements during non-use periods allows to check the organic content in water continously between 1 and 999 ppb. Our dispenser allows the volumetric controlled dispensing of water with an increment of 0.1 L and a tap volume from 0.1 to 99 L. The system prevents overflow of containers and allows to dispense water without supervising. wall mounted configuration To save valuable benchtop space the system can be ordered as wall mounted configuration. The whole system can be mounted on the...

 Open the catalog to page 9
Water Purification System Aquinity² P10-10

Helping tools to maintain system Main Screen: The Software allows the user to see all information to use maintenance tool and track back historical values up to 1 year.

 Open the catalog to page 10
Water Purification System Aquinity² P10-11

* 190-0305 Final Filter to reduce Endotoxin, DNA + RNAse

 Open the catalog to page 11
Water Purification System Aquinity² P10-12

Made in Germany Your trusted partner for more than 30 years [email protected] www.membrapure.de

 Open the catalog to page 12
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.