*mymedicalexpo

Catalogs
membraPure
Water Purification System Aquinity² P35/70

Water Purification System Aquinity² P35/70

Product catalog summary

Overview: The Aquinity² P35/70 system is designed for producing pure water (Type II, < 1 µS/cm) and ultra pure water (Type I, 0.055 µS/cm) from tap water. It features a reverse osmosis and conditioning module, with a production rate of 10 L/h, and options for 35 L or 70 L storage reservoirs.

System Components: The system includes a reverse osmosis module, storage tank with UV lamp, conditioning module, pre-treatment module, ultra pure module, TOC sensor, UF module, and a dispenser. It also features automatic recirculation to maintain water quality.

Technical Specifications: Conductivity for Type II is < 1 µS/cm and for Type I is 0.055 µS/cm. Resistivity is > 1 MΩ·cm for Type II and 18.2 MΩ·cm for Type I. TOC levels are < 10 ppb for Reagent, < 5 ppb for Life Science, and < 2 ppb for Analytical. The dispensing flow rate is 2.0 L/min, with a productivity rate of 10 L/h, optionally 20 L/h. Bacteria levels are < 0.01 cfu/mL, and particulate matter is > 0.2 µm, less than 1 particulate/mL.

Feed Water Requirements: The system requires tap water with conductivity < 2000 µS/cm, inlet pressure of 1.5 to 6 bar, free chlorine < 0.1 mg/L, SDI < 3, pH 3 to 9, and temperature 5 to 35 °C.

Configurations: Available configurations include Reagent, Analytical, Life Science, Analytical TI, and Life Science TI, with options for UV reactor, UF module, and TOC monitoring.

Options and Features: The system offers volumetric dispensing, TOC monitoring, wall-mounted or bench-integrated configurations, and a user-friendly interface with a touch screen monitor for tracking and maintenance.

Consumables & Spare Parts: Includes conditioning module, ultra pure module, vent filter, UV lamps, pretreatment module, ultrafiltration module, final filter, and disinfection tablets.

Contact Information: Manufactured by membraPure GmbH, located in Hennigsdorf, Germany. Contact via phone or email for more information.

Catalog excerpts

Water Purification System Aquinity² P35/70-1

Aquinity² P35/70 Produces pure water & ultra pure water

Open the catalog to page 1

Water Purification System Aquinity² P35/70-3

production of pure water (Type II, < 1 pS/cm) and ultra pure water (Type I, 0.055 pS/cm) out of tap water.

Open the catalog to page 3

Water Purification System Aquinity² P35/70-4

The Aquinity² P35/70 system is equipped with a reverse osmosis (RO) and conditioning module to produce deionised water (DI water) into the external storage reservoir (35 L or 70 L) with a production rate of 10 L/h and an access to tap DI water directly. Out of the storage tank the ultra pure water is produced with mixed bed cartridges and then can be tapped with a ﬂexible dispenser. During non-use automatic recirculation within the Aquinity² system ensures a permanent high quality of ultrapure water. All components of the Aquinity² are assembled in an especially designed housing. The system can...

Open the catalog to page 4

Water Purification System Aquinity² P35/70-5

Ultra pure Scheme shows ﬂowchart of Aquinity² P 35/70 Life Science TI. Storage Tank Final Filter purge before tapping water Tap Water

Open the catalog to page 5

Water Purification System Aquinity² P35/70-6

Technical Specifications 1 under appropriate operating conditions, typically < 3 ppb * with Life Science model or microbiological endfilter

Open the catalog to page 6

Water Purification System Aquinity² P35/70-8

Configurations Aquinity2 P35/70 is available in different configurations to fit the specific requirements of pure and ultrapure water quality for different applications.

Open the catalog to page 8

Water Purification System Aquinity² P35/70-9

Options TOC monitoring (TI version) volumetric dispensing The TOC monitoring during production and intermittent measurements during non-use periods allows to check the organic content in water continously between 1 and 999 ppb. Our dispenser allows the volumetric controlled dispensing of water with an increment of 0.1 L and a tap volume from 0.1 to 99 L. The system prevents overﬂow of containers and allows to dispense water without supervising. wall mounted conﬁguration & bench integrated (BI version) To save valuable benchtop space, the system is available in two main space-saving conﬁgurations....

Open the catalog to page 9

Water Purification System Aquinity² P35/70-10

Helping tools to maintain system Warning of customer in case of over limit and service case Main Screen: The Software allows the user to see all information to use maintenance tool and track back historical values up to 1 year.

Open the catalog to page 10

Water Purification System Aquinity² P35/70-11

Consumables & Spare Parts * 190-0305 Final Filter to reduce Endotoxin, DNA + RNAse

Open the catalog to page 11

Water Purification System Aquinity² P35/70-12

Made in Germany Your trusted partner for more than 30 years [email protected] www.membrapure.de

Open the catalog to page 12

All MembraPure catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list