Astacus² Produces ultra pure Water

The Astacus² system is designed for the production of ultra pure water (Type I, 0.055 µS/cm) out of pretreated water (e.g. Reverse Osmosis, DI, EDI, distilled water).

The ultra pure water is produced with a combination of optimized mixed bed cartridges and can be tapped with a flexible dispenser. If water is not used, automatic recirculation within the Astacus² system ensures a permanent high quality of ultra pure water. All components of the Astacus² are assembled in an especially designed housing. The system can be easily opened by removing the side panel to access the ultra pure module, UV lamp and ultra filtration module. The µS - control checks the conductivity of feed water to protect the cartridges against inappropriate feed water (black line). If conductivity...

Final Filter rejected in case of poor feed water purge before tapping water Scheme shows flowchart of Astacus² Life Science TI. Tap Water

Technical Specifications 1 under appropriate operating conditions, typically < 3 ppb * with Life Science model or microbiological endfilter + with dispenser 340 x 415 x 750 mm

Astacus2 is available in different configurations (Reagent, Analytical & Life Science) to fit the specific requirements of ultra pure water quality for different applications. An optional TOC integrated sensor allows the user to monitor the TOC content permanently online.

Options TOC monitoring (TI version) volumetric dispensing The TOC monitoring during production and intermittent measurements during non-use periods allows to check the organic content in water continously between 1 and 999 ppb. Our dispenser allows the volumetric controlled dispensing of water with an increment of 0.1 L and a tap volume from 0.1 to 99 L. The system prevents overflow of containers and allows to dispense water without supervising. wall mounted configuration To save valuable benchtop space the system can be ordered as wall mounted configuration. The whole system can be mounted on the...

User Interface & Software Currently recorded data and warning messages will be displayed on the touch screen monitor. The software furthermore supports the user with a self-diagnostic module which reduced service time and costs. Helping tools to maintain system Main Screen: The Software allows the user to see all information to use maintenance tool and track back historical values up to 1 year. Trackable values up to 1 year Warning of customer in case of over limit and service case

Made in Germany Your trusted partner for more than 30 years [email protected] www.membrapure.de