Incubators - 32 Pages

Add to MyMedicalExpo favorites
Incubators

Catalog excerpts

memmerh Experts in Thermostatics PERFECTLY COORDINATED. PERFECTLY CONTROLLED. INCUBATOR I C02 INCUBATOR ICOmed COMPRESSOR-COOLED INCUBATOR ICPeco/ICP PELTIER-COOLED INCUBATOR IPP STORAGE INCUBATOR IPS ATMOSAFE. MADE IN GERMANY.

 Open the catalog to page 1

Memmert incubators for microbiology. Energy efficient, precise, 100% AtmoSAFE. Even slight temperature deviations in the working chamber of an incubator may cause a test to fail. For this reason, the heating and control system of Memmert incubators are perfectly adapted to each other. During heating up and cooling down as well as in running operation, all appliances precisely keep the desired parameters within the smallest tolerance limits. Not only at one measuring point, but in the entire working chamber. Each individual Memmert incubator complies with the strict requirements of DIN...

 Open the catalog to page 2

INCUBATORS I PAGE 4 - 8 Microbiological tests, colony counts, virology, toxicology Medical device class lla for cultivation of cells or tissue, in-vitro fertilisation, gene expression Microbiological tests, colony counts, virology, toxicology, cultivation above and below room temperature, alternate stability tests Microbiological tests, colony counts, virology, toxicology, cultivation above and below room temperature, alternate stability tests Protein crystallography, microbiological tests, colony counts, virology, toxicology, cultivation above and below room temperature, alternate...

 Open the catalog to page 3

Incubator IN/INm and IF/IFm with SingleDISPLAY Incubator INplus/INmplus and IFplus/lFmplus with TwinDISPLAY Natural convection or forced air circulation AtmoCONTROL software Model sizes: 30 / 55 / 75 / 110 / 160 / 260 / 450 / 750 +30 °C to +80 °C INCUBATOR I Memmert incubators I are at home in the world of research, medicine, pharmaceutics and food technology. Organic chamber loads require gentle heating. For this reason, the heating and control system are especially optimised for low temperatures of up to +80 °C. To prevent temperature overshoots, temperature is increased within a very...

 Open the catalog to page 4

As little air circulation as possible in the incubator Forced air convection may destroy the protective layer from moist air that is generated during incubation over the samples. This would lead to dehydration of the culture. In a Memmert incubator, the perfect combination of all-round surface heating and temperature control system ensures that incubation generally takes place without forced air circulation. Provided the chamber is fully loaded and forced air circulation is required, it can be precisely adjusted in 10 % steps from 0 to 100 %. Sterilisation The chamber of the incubators...

 Open the catalog to page 5

Standard units are safety-approved and bear the test marks: (EAC not valid for medical devices) Interior: Stainless steel, material 1.4301 (ASTM 304) with all-round deep-drawn ribs to integrate the large-area heating with ceramic-metal sheath Housing: Textured stainless steel, rear zinc-plated steel, intuitively operated SingleDISPLAY or TwinDISPLAY (TFT colour display) with touchscreen; inner glass door, outside fully insulated stainless steel door (from size 450 two leaves) Fresh air: Admixture of pre-heated fresh air by electronically adjustable airflap Connection: Mains cable with plug...

 Open the catalog to page 6

Voltage 115 V, 50/60 Hz Extended overtemperature protection by additionally integrated Pt100 sensor for independent temperature monitoring for models with SingleDISPLAY Chamber modification for the application of reinforced perforated stainless steel shelves or stainless steel grids (bearing rails mounted in the working chamber) - includes replacement of standard grids by reinforced grids Interior lighting for observing the load Interior socket (can only be ordered with limited temperature range - max. +70 °C) ampacity 230 V, 2.2 A, can be switched off with the On/Off switch, cannot be...

 Open the catalog to page 7

Stainless steel grid, electropolished Additional reinforced stainless steel grid, electropolished, max. loading 60 kg; from size 450 with guide bars and fixing screws (only in connection with option K1). Please consider max. loading of chamber Perforated stainless steel shelf Additional reinforced stainless steel shelf, max. loading 60 kg; with guide bars and fixing screws (only in connection with option K1). Please consider max. loading of chamber Stainless steel slide-in drip tray, 15 mm rim (may affect the temperature distribution) -cannot be used in connection with option K1 Stainless...

 Open the catalog to page 8

C02 Incubator ICOmed with TwinDISPLAY Software AtmoCONTROL Model sizes: 50 / 105 / 150 / 240 +18 °C to+50 °C Humidity 40 to 97 % rh C02 concentration 0 to 20 % 02 concentration 1 to 20 % C02 INCUBATOR ICOmed Safety at all times. When it comes to safety and user friendliness, the highly modern C02 incubator ICOmed is the perfect solution: Thanks to the battery-buffered ControlCOCKPIT, the operating display, logging and C02 control remain fully functional even when there is a power failure. All parameters are logged in accordance with the FDA and, when individually adjusted ranges for C02,...

 Open the catalog to page 9

Unrivalled user friendliness All parameters can be set easily and intuitively both with the ControlCOCKPIT or the AtmoCONTROL software. The shutter box can be opened, allowing fast access to controls. Maintenance is possible even if the appliances are stacked. The appliance has USB and Ethernet connections as well as a data logger with a ten-year storage capacity. Data can be read and programmes can be transferred by remote access. Minimising vaporisation and condensation The active humidity control minimises vaporisation in the interior and ensures short recovery times after the door has...

 Open the catalog to page 10

Incubators / CO2 INCUBATORS ICOmed 11 CO2 INCUBATORS ICOmed according to DIN 12880:2007-05 , EN 61010-1 (IEC 61010-1), EN 61010-2-010 Standard units are safety-approved and bear the test marks: Interior: Stainless steel, material 1.4301 (ASTM 304), deep- drawn, seamlessly welded Housing: Textured stainless steel, rear zinc-plated steel, intuitively operated TwinDISPLAY (TFT colour display) with touchsceen; fully insulated stainless steel door and heated inner glass door Automatic Humidity and CO2 sensor sterilised inside the CO2 sterilisation: incubator Connection: Mains cable with plug...

 Open the catalog to page 11

All Memmert GmbH + Co. KG catalogs and technical brochures

  1. HPP

    2 Pages

  2. Climate Chambers

    32 Pages

  3. Peltier

    12 Pages

  4. HPPlife

    2 Pages

Archived catalogs

  1. INCOmed

    2 Pages

  2. ICP

    56 Pages

  3. IPP-IPS

    44 Pages

  4. ICH-C

    68 Pages

  5. ICH

    64 Pages

  6. HPP-IPPplus

    64 Pages