The MGV 130 system
4Pages

{{requestButtons}}

Catalog excerpts

The MGV 130 system - 1

Many dental laboratories are currently forced to optimize their costs. An effective way to do so is by saving time. One of the available options, while maintaining the quality standards, is to accelerate the mounting of models into articulator. The patented MGV 130 system was designed for mounting models into articulator This system can be used for manufacturing removable dental prostheses, fixed long-term or temporary bridges or for registering primary study models.. For transport between the lab and the dentist's office, only the MGV 130 adjusting key is used. *The MGV 130 system can be used with the following articulators: MENSADENT, Amann Girrbach Artex Carbon and KaVo Protar and repositioning plates Accu-Trac , Giroform , Modellsystem 2000 .

Open the catalog to page 1
The MGV 130 system - 2

Operating procedure with MGV 130 system Prepare a casting plate and insert little metal pad Pour plaster over and Insert a suitable adapter to work Align the bottom model with the incisor point using a rubber band). first molar. Loosen lateral locking screw on the upper part Loosen upper locking screw on the upper part

Open the catalog to page 2
The MGV 130 system - 3

The recommended height of the model is 30mm including registration material First tighten the upper Then tighten the side Remove the bite registration material, return the incisial check maximum contact using articulation paper Remove both models and both screws simultaneously has been adjusted to specific After repositioning tooth system, the articulator is ready

Open the catalog to page 3
The MGV 130 system - 4

30100 Plzen Czech Republic *Giroform is registered trademark of Amann Girrbach GmbH, 75177 Pforzheim, DE, *Accu-Trac is registered trademark of Coltene/Whaledent AG, 9450 Altst tten, CH, *Modellsystem 2000 is registered trademark of Baumann Dental GmbH, 75210 Keltern-Ellmendingen, DE *KaVo and Protar are registered trademarks of Kaltenbach & Voigt GmbH, 88400 Biberach, DE, *Artex and Splitex are registered trademarks of Amann Girrbach GmbH, 75177 Pforzheim, DE

Open the catalog to page 4

All MENSADENT s.r.o. catalogs and technical brochures

  1. Waxes

    6 Pages