*mymedicalexpo

R-030350 HYDRAULIC PRESS

Product catalog summary

Introduction
The document discusses the advanced techniques applied to the construction of a hydraulic laboratory press by MESTRA, utilizing heat-treated aluminium for enhanced performance and durability.

Specifications
- The press features a bridge and base made entirely of cast, heat-treated aluminium, offering a 10-year warranty against breakage in laboratory use.
- All wear parts are made from treated, hardened, and ground steel.
- The press includes oversized components such as a spindle with a 36 mm diameter and trapezoid thread, and columns with a 35 mm diameter.

Design and Functionality
- The width between columns and the diameter of the top plate allow for easy insertion and removal of flasks without raising the spindle, saving time and effort.
- The bottom plate recovery system ensures the plate returns to its initial position when the oil-hydraulic system is released.
- The oil-hydraulic system is designed to prevent oil leakage.

Dimensions and Capacity
- Inside dimensions: Width 140 mm, Height P-2 for two flasks 180 mm, Height P-3 for three flasks 235 mm.
- Weight: 12.5 kg.
- Maximum piston travel: 25 mm.
- Maximum power admitted: 15,200 Kg (400 Kg/cm²), recommended: 9,500 Kg (250 Kg/cm²).

Technical Characteristics
- Height (screw down): 510 mm.
- Width: 225 mm.
- Depth (without lever): 230 mm.
- Table diameter: 125 mm.
- Weight: 20 Kg.

Conclusion
The MESTRA hydraulic laboratory press is robustly designed to withstand high pressures and is available for two or three flasks, making it a reliable choice for laboratory applications.

Catalog excerpts

PRENSAS HIDRAULICAS Y MANUALES HYDRAULIC AND MANUAL BENCH PRESSES PRESSES HYDRAULIQUES ET MANUELLES

Open the catalog to page 1

Juntas y retenes de calidad contrastada. Seals and retainers of proven quality. Joints et goupilles de premier choix. Aluminio tratado termicamente 10 años de garantía contra rotura (en prácticas de uso de laboratorio). Heat-treated aluminium: 10-year warranty against breakage (in practical laboratory use) Aluminium traité thermiquement. 10 ans de garantie contre la rupture (au cours d´une utilisation normale au laboratoire). R-030350 Las nuevas técnicas aplicadas al aluminio no sólo se emplean en la aeronáutica y la automoción. MESTRA ha desarrollado dicha técnica para la construcción de la...

Open the catalog to page 2

La anchura entre columnas y el diametro del plato superior, permiten introducir y sacar la(s) mufla(s) con la brida para prensa MESTRA R-030380-90-400-410, sin necesidad de tener que subir el husillo, ahorrando tiempo e incomodidades. The width between columns and the diameter of the top plate enable flasks to be put in and taken out with the MESTRA R-030380-90-400-410 clamps for press with no need to raise the spindle. This saves time and trouble. La largeur entre les colonnes et le diametre du plateau superieur, permettent d'introduire ou denlever les moufles avec la bride MESTRA R-030380-90-400-410,...

Open the catalog to page 3

TALLERES MESTRAITUA, S.L. Txori-erri Etorbidea, 60 Tfno. + 34 944 53 03 88* - Fax + 34 944 71 17 25 E-mail: [email protected] - www.mestra.es 48150 SONDIKA - BILBAO - (Espana) PEDIDOS: [email protected] Distributor / Distributor / Distributee

Open the catalog to page 4

All MESTRA Talleres Mestraitua, S.L. catalogs and technical brochures

Archived catalogs

R-010070 ARTICULATOR FOR BALANCED PROSTHESES
1 Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list