Light curing time 20s, ISO4049-Resin based dental restorative material Nexcomp Flow is a low viscosity, light-cured, radiopaque flowable composite resin for invasive cavity preparation. — INDICATION Restoration of invasive cavity Pits and fissure sealing Base and Liner for direct restoration Repair acrylic temporary materials Repair of esthetic indirect restorations — CONTRAINDICATIONS Nexcomp flow should not be used if patients are known to be allergic to methacrylate resins. — STORAGE Store at room temperature. Close syringe cap immediately after use. Avoid from directly sun light. — SHELF LIFE ■ 3 years — COMPONENTS Nexcomp flow set 2gX5 syringes (A2, A3, A3.5, B2,B3) Nexcomp flow 2g x 2 syringes (A1, A2, A3, A3.5, A4, B1, B2, B3, OA2, OA3, C2, D2, WT, TL) CHECKING SHEET Nexcomp Flow — INSTRUCTIONS © Select the desired type and shade of Nexcomp Flow prior to isolating and preparing 0 Clean the preparation with a slurry of pumice and water. Rinse and dry the preparation 0 Apply 37% Meta Etchant gel to available enamel / dentin for 15 seconds. Remove gel and rinse for 20 seconds, Blot dry keep moist, do not rub. @ Apply Bond to the tooth-Apply a double coat of Meta P&Bond by using mircrobrush. Gently air dry lor 5 seconds. Light cure for 10 seconds. If you apply other product to saturate all internal surfaces, or bonding agent according to manufacturer's instructions 0 Dispensing-Nexcomp Flow flowable composite can be delivered directly from the disposable tip. Place and light cure restorative in increments. Cure each increment by its entire surface to curing light for 20 seconds 0 Finish and Polish-After contouring composite, polish surface with finishing and polishing proximal areas. 0 Occlusion-Check lateral and centric occlusion. Adjust as necessary. — SYMBOLS ^ Use By rmn Batch Code /■£ CE-Mark and identification number of notified body. V V Product conforms to the essential requirements 0120 of the Medical Device Directive 93/42/EEC A Attention, See instruction for use ml Manufacturer SPECIAL FUNCTION PRINT COLOR — CAUTIONS ■ Avoid contact of Nexcomp flow with the skin/mucous membrane or eyes ■ None polymerized Nexcomp flow may be causes lightly, reversible irritation or lead to a general sensitization against methacrylates. ■ Keep away from child. ■ For dental use only ■ Do not use after the date of expiration. ■ Exposure to light may be lead to premature polymerization META® BIOMED Manufactured by META BIOMED CO.LTD. ml 634, Yeonje-ri, Gang-oe-myeon Cheong-won-gun, Chungcheongbuk-do, Korea Tel: +82 -43-216- 0433 Fax:+82-43-217-1988 E-mail: [email protected] Web site: http://www.meta-biomed.com DESIGNER tl-aiy RECOGNITION Tj-fetli CONFIRMATION MGTA BIOMED CO.LTD. DATE NAME SIGN