ME600
4Pages

ME600 datasheet MONOLITHIC PIEZORESISTIVE CERAMIC PRESSURE SENSOR Metallux ME600 monolithic pressure sensors are made with a ceramic cell and work following the piezoresistive principle. The Wheatstone bridge is screen printed directly on one side of the ceramic diaphragm by means of Thick Film technology. The diaphragm’s opposite side can be exposed directly to the medium to be measured. Because of the Al2O3 ceramic excellent chemical resistance (aggressive gases, most of solvents and acids, etc.), no additional protection is normally required. Thanks to the reinforced outer area (monolithic structure), the sensor can be mounted directly in a plastic or metallic case by using O-ring. ME600 sensors are designed in such a way so that temperature changes and pressure overloads do not cause loss in reliability. Metallux ME600 sensors ensure optimal linearity across the entire range of measurement and minimize effects of hysteresis. Metallux ME600 family substitutes ME662, ME663, ME651 and ME667 families FEATURES Excellent resistance to corrosion and abrasion Optimized for high pressure applications Easy mounting Customizable Pressure sensors family tree Ø9.0 mm Measuring cell Capacitve Gau ge sealed gau ge absolu te Al 2O 3 96% or 99.6% With housing Also available in not thermally compensated version Digitally trimmed offset, also available not thermally compensated Thermally compensated Ø32.4 mm4 Piezore sistive Gau ge sealed gau ge absolu te Thermally compensated Flush diaphragm Measuring cell Measuring cell METALLUX Pressure sensors Not available with sapphire diaphragm. Suitable for low pressure range bar) METALLUX • 6850 Mendrisio • Switzerland Metallux SA reserves the right to change this datasheet without notice

ME600 datasheet Technical characteristics Parameters Sensor type Description Monolithic, gauge ≤ 5 (ceramic cell only) Response time Supply voltage range See ordering code, other available on request Current consumption Operating temperature Storage temperature Bridge impedance REACH, RoHS, Conflict Minerals free Compliant with Overload pressure Burst pressure Vacuum capability Sensitivity Accuracy 4 (typ./max.) Cavity diameter Thermal offset shift (typ./max.) Thermal span shift Min. Typ. Max. - 0.030 -0.016 0 -40 °C...+135 °C (-40 °F… / … +275 °F) 1000 hours @85 °C (185 °F) & 85 %RH 500...

ME600 datasheet Mechanical drawings and electrical schematics Pitch 2.54 mm (0.100 inches), top view Pitch 1.27 mm (0.050 inches), top view Pitch 1.90 mm (0.075 inches), top view (with NTC) Notes Pad dimensions : 2.54 mm pitch version : 1.60 x 1.60 [0.063 x 0.063], option not available with temperature sensor mounted 1.27 mm pitch version : 0.87 x 2.00 [0.034 x 0.079] ], option not available with temperature sensor mounted 1.90 mm pitch version : 1.50 x 1.60 [0.059 x 0.063], only with temperature sensor mounted Bottom view (Pnom < 100 bar) Bottom view (Pnom ≥ 100bar) Side view Notes...

ME600 datasheet Electrical terminations Example: type 0, pre-tinned soldering pads Example: type 2, pins L = 13,0 ± 0,5 [ 0,35 ± 0,02 ] Example: type 4, polyester cable Other types available Wire section: AWG24 Pitch: 2.54 ± 0.05 [ 0.1 ± 0.002 ] Cable length: 50.8 ± 2 [ 2 ± 0.08 ] Stripping length: S = 3.2 ± 0.7 [ 0.13 ± 0.028 ] Type 1, pins L = 9 ± 0.5 [ 0.51 ± 0.02 ] (only for pitch 2.54 mm) Type 3, silicon single wire, 50.8 mm, Op./St. Temp: -20°C...+135°C Type 5*, PVC flat cable, 50.8 mm, Op./St. Temp: -20°C...+105°C Type 6, NOMEX™ flat cable, 50.8 mm, Op./St. Temp: -20°C...+105°C Type...