Easylabel BS brochure
2Pages

EASYLABEL® DAYLIGHT PRINTER OF ALPHANUMERICAL DATA ON RADIOGRAPHIC FILMS EASYLABEL® is a microprocessor controlled device for printing, under daylight conditions, up to 5 lines of 40 alphanumerical characters on an X-RAY film (blue or green light) by using a radiographic cassette provided with a sliding window. Equipped with a keyboard and an alphanumerical display, the different data pertinent to the examination are presented in the following page sequence: NAME OF THE DIAGNOSTIC CENTER OPERATOR NAME PATIENT NAME X-RAY ROOM DATE TIME PLACE AND DATE OF BIRTH EXAMINATION PROJECTION COMMENT EXAMINATION DATA When he radiographic cassette is inserted into the system, the information will be printed exactly in the same presentation as shown on the display. A «direct editing» function is available in all fields, except for the name of the diagnostic center, date and time, which are protected by a «password». EASYLABEL® holds in its permanent memory the initial informations, such as the name of the center and the diagnostic examination rooms, and informations concerning the patient. The following data are available in the memory system: THE NAME OF THE DIAGNOSTIC CENTER THE NAME OF 26 OPERATORS THE NAME OF 10 DIAGNOSTIC EXAMINATION ROOMS THE NAME OF 125 PATIENTS, WITH PLACE AND DATE OF BIRTH 26 RADIOGRAPHIC PROJECTIONS 26 COMMENTS

500 621 685 645 1110 1110 2 53 Dimensions expressed in mm By using an appropriate software, through a RS 232 interface, EASYLABEL® can be linked to a computer for the transfer and storage of patient data to a radiological equipment (i.e. our FLAT), for the transfer on the exposure parameters (kV, mAs, dose, etc.). After each examination, EASYLABEL® prints on the film the significant data of the exams: in this way, the radiographer can develop all the films after having completed the exams, without any risk of confusion. EASYLABEL®, on top, is counting each film printed and computing the...