One-Curve
1 / 12Pages

Catalog excerpts

One-Curve - 4

ONE SINGLE INSTRUMENT FOR ROOT CANAL SHAPING > Simplified instrument management > No risk of cross-contamination: single use REDUCED SHAPING TIME > More time for irrigation Compared to an instrumental sequence (1) Compared to a heat-treated reciprocating instrument (2) Shaping ability of different single-file systems in severely curved root canals of extracted teeth - S. Burklein et al Data: MICRO-MEGA R&D

Open the catalog to page 4
One-Curve - 5

C.Wire : Heat-treatment of Nickel-Titanium, a One Curve exclusivity. C.Wire is a technique designed, developed and applied by MICRO-MEGA. • Controlled memory • Pre-bendable • Conservation of the curvature Product MICRO-MEGA last generation more resistant (4) to fracture (cyclic fatigue) Pre-bendable > Elimination of constraints > Easier access to the root canal Source data (3) (4)

Open the catalog to page 5
One-Curve - 6

The instrument was developed to respond to the need of efficient shaping while respecting the initial root canal anatomy. > The non-existent ovalization secures the apical zone(5) > The variable cross-section combined with continuous rotation ensures excellent cutting efficiency and a perfectly centered trajectory(7) Deviation WL: Working Length One Curve One single instrument in continuous rotation Source data Data MICRO-MEGA R&D Shaping ability of 4 different single-file systems in simulated S-shaped canals. A.M Saleh et al.

Open the catalog to page 6
One-Curve - 7

Continuous rotation Speed 300 rpm, torque 2.5 N.cm Direct downward movement until the working length Reduced mechanical treatment time Treatment of simple and complex root canal anatomies L 21, 25, 31mm The instrument is hyper-flexible and extremely resistant. You have full control over the instrument.

Open the catalog to page 7
One-Curve - 8

ADDITIONAL PRODUCTS TO THE RANGE > Sterile paper points (box of 200) > Gutta percha points (box of 60) « A good instrument needs to adapt itself to the most difficult cases. One Curve meets these requirements through its flexibility, its cutting efficiency and its fracture resistance. » Dr. Oussama Bouammar, France « Perfect combination between high flexibility and good cutting efficiency. Great safety and respect for curved canals. » Dr. Mostafa Anwar, Egypt

Open the catalog to page 8
One-Curve - 9

TESTIMONIAL 3 « I love this file! It is almost addictive! A real game changer » Dr. Konstantinos Kalogeropoulos, Greece CLINICAL CASE Pr. Khaled Balto, Saudi Arabia Preoperative x-rays: Postoperative x-rays: Tooth n°36 Diagnosis: irreversible pulpitis Treatment approach: > Initial canal exploration with manual files n°008 and n°010 > Glide path with One G > Preflaring with One Flare > Shaping with One Curve in three waves up to the apex

Open the catalog to page 9
One-Curve - 10

CLINICAL CASE Dr. Tara McMahon, Belgium Preoperative x-rays: Postoperative x-rays: Endodontic treatment: Diagnosis: apical periodontitis > Access cavity to locate the 3 canals and canal initial exploration with MMC n°010 > Preflaring with One Flare. Glidepath with manual MMC n°015, 010 & 008 files using the crown down technic > Working length (WL) determination using the MMC n°010 file. When the n°015 file freely reaches the apex, mechanical shaping > For mesial canals, One Curve is used up to the first curvature then rinse with NaOCl, patency checking with MMC n°010. One Curve is then used...

Open the catalog to page 10
One-Curve - 11

Data MICRO-MEGA (2) « Rapport de validation One Curve Micro-Mega Tara Mc Mahon 2017-08-25 » (3) « Rapport valeurs torsion-flexion apres taillage 20170725 » + « Note valeurs torsion-flexion One Curve 20170725 » (4) « Rapport fatigue cyclique One Curve 2017-09-12 » (5) « Rapport One Curve traitement thermique Micro-Mega Fabienne Perez 2017-07-07 » (6) « Rapport One Curve traitement thermique Micro-Mega Fabienne Perez 2017-07-07 » One Curve GP Points Presentation One Curve Paper Points Presentation 0459 Year of CE-marking: 2017 - Medical device class IIA according to directive...

Open the catalog to page 11
One-Curve - 12

Non contractual pictures - MICRO-MEGA® reserves the right to modify the characteristics of its products without prior notice. 5-12, rue du Tunnel 25006 Besançon Cedex - France

Open the catalog to page 12

All Micro-Mega catalogs and technical brochures

  1. Catalogue 2019

    48 Pages

  2. Alto Surge

    38 Pages

  3. MM-ENDObook

    40 Pages

  4. Catalogue 2018

    48 Pages

  5. 2Shape

    12 Pages

  6. EndoUltraTM

    12 Pages

  7. One Flare

    6 Pages

  8. R-Endo

    2 Pages

  9. MM-MTA

    8 Pages

  10. SANAO

    6 Pages

  11. X-Cid® 2

    8 Pages

  12. MM.control

    6 Pages

  13. Revo-S®

    20 Pages