Revo-S®
20Pages

Getting to the root of the problem! Your Endo Specialist™

Revo-S™ P. 4-17 0459 Year of CE-marking: 2008 Medical device class IIA according to directive 93/42/EEC Certifying body: LNE/G-MED Medical device for dental care, meant for professional dental use only. See product labelling and, where applicable, instructions for use. Revo-S™ Paper Points Revo-S™ GP Points P. 18 Year of CE-marking: 2010 Medical device class I according to directive 93/42/EEC Medical device for dental care, meant for professional dental use only. See product labelling and, where applicable, instructions for use. Year of CE-marking: 2010 Medical device class IIA according to...

Revo-S™, a unique and innovating sequence n Intended for initial endodontic treatments, Revo-S™ innovates with only 3 instruments. n asymmetrical section initiates a snake-like movement of the Its instrument inside the canal. n igh performance and simple to use, this sequence is H adapted for most root canal anatomies.

Revo-S Endo Revolution! ™

The asymmetrical cross-section An asymmetrical cross-section: more flexibility and less stress n he asymmetrical cross-section provides less stress on the T instrument. The canal axis has 3 cutting edges located on 3 different radiuses: R1, R2 and R3. n The smaller section allows more flexibility and offers a better ability to negotiate curves. n The asymmetrical cross-section increases the available volume for upward debris elimination. The instrument works in a cyclic way (3C Concept): 1) Cutting 2) Clearance (debris elimination) 3) Cleaning R2 R3 Asymmetrical section Symmetrical section

A customized treatment using 3 instruments n Inactive tip. n extended helical machining up to the coronal region T he increases the instrument’s flexibility. n eduction of the contact lengths of the blade on the R dentine: reduction of stress. n etter debris elimination and more efficient cleaning B owing to the asymmetrical cross section of the SC1. n SC2 instrument has a symmetrical cross section, The with a .04 taper allowing better penetration. Its equilateral section (3 identical edges) ensures a perfect guidance of the instrument up to the apical region of the canal, owing to the...

Root canal cleaning and shaping Root canal finishing

Root canal cleaning and shaping Root canal finishing SU Asymmetrical section, recapitulates the action of the first two instruments

Classics instruments Root canal cleaning and shaping Root canal finishing

A simple protocol for efficient treatments Basic sequence with only 3 instruments

Advice and recommendations Initial penetration n The first step consists of an initial penetration of the canal using a conventional stainless steel hand instrument (usually a K file N°10 – MMC n°10 L21 mm) which provides information about the canal anatomy complementary to that obtained by the pre-operative X-rays. n The use of ENDOFLARE® is recommended (The MICRO-MEGA® +). n The G-Files™ safely enlarge the glide path in preparation for RCT with rotary instrumentation system (The MICRO-MEGA® +). n The instruments should be removed frequently from the canal and cleaned using a compress in...

Apical finishing For a successful canal preparation, apical finishing is essential: MICRO-MEGA® offers an optional adapted solution with specific instruments: AS30, AS35, AS40. These instruments enable efficient widening of the apical preparation to .06 taper respecting the preparation performed with SC1, SC2 and SU. This finishing enables an improved flow of the irrigating solution promoting efficient disinfection and facilitated obturation. n Shaping down to the working length: more accurate finishing of the apical 1/3. n Efficient disinfection: The irrigating solution penetrates to the...

InGeT® instruments Apical finishing

Classics instruments Apical finishing

AS protocol: for a perfectly safe finishing

Advice and recommendations n The AS instruments should be used without apical pressure, after using the SU. n necessary and according to the root canal anatomy, use the AS30, AS35 and If AS40 to enlarge the apical region. n Their penetration depth corresponds to the working length. This length is shortened in thin root canals or with a marked curvature. They are then used in a step back motion (AS30 at WL, AS35 at WL -0.5 mm, AS40 at WL -1 mm if necessary). n a perfect apical finishing, use the sequence: For l AS30 only for an apical finishing at 30/100. l AS30 then AS35 for an apical...

Revo-S™ Paper Points Gain in simplicity: One file = one paper point! n Four paper point sizes, perfectly adapted to any root canal prepared with the Revo-S™ files. n Quick and efficient drying. n Cost saving: Less paper points are needed to dry the canals thanks to their adapted tapers. n Easy-to-identify owing to the Revo-S™ colour code. n Shaped for easy and reliable penetration to the apex. Revo-S™ GP Points Designed for every filling method! AS30 SU Improved efficiency owing to the Revo-S™ Paper Points! Their taper perfectly matches canals shaped with Revo-S™ files and thus guarantees...

Revo Spreaders NiTi Spreaders The Revo Spreaders have an excellent gutta percha plugging ability and are meant for lateral condensation obturation technique after use of the Revo-S™ files. n High flexibility and excellent root canal curve negotiation owing to NiTi = more safety! n 04 taper for optimal sliding of the spreader along the gutta percha . cone. n 0° point for optimum gutta percha plugging. 9 Revo Condensor NiTi Thermocompactor The Revo Condensor is the ideal instrument for thermomechanical condensation technique: The gutta percha is heat plastified through friction. The Revo...

www.micro-mega.com www.revo-s.com JC.AUGÉ n www.jcauge.com Micro-Mega® 5-12, rue du Tunnel 25006 Besançon Cedex - France Tel.: +33 (0)3 81 54 42 34 Fax: +33 (0)3 81 54 42 39 mmid@micro-mega.com MICRO-MEGA® reserves the right to modify the characteristics of its instruments without notice. Pictures non contractual.