TEM-100

TEM-100

Product catalog summary
Overview: The TEM-100 is a compact transmission electron microscope designed for biomedical research, nanoscience, and technology fields, as well as for educational purposes. It offers high-quality electron microscopic imaging with easy computer control and a reliable vacuum system.
Operating Modes: The microscope operates in low magnification, high contrast, and microdiffraction modes. It is suitable for indoor use with specific temperature and humidity conditions.
Technical Specifications:
  • Resolution: 0.4 nm in basic mode, 0.5 nm in contrast mode.
  • Electron-optical increases: 50 to 600,000 in basic mode, 50 to 430,000 in contrast mode.
  • Diffraction length range: 200 to 2000 mm in basic mode, 280 to 2800 mm in contrast mode.
  • Accelerating voltage: 25 to 100 kV with adjustment steps of 0.05, 1, and 5 kV.
  • Power Supply: Single-phase 220 V, frequency 50/60 Hz.
Features:
  • High contrast mode for biomedical objects.
  • Original design vacuum camera with easy and reliable operation.
  • Output of electron microscopic images on screen using a CCD-camera.
  • Image editing with specialized software.
Photographic System: The system includes a vacuum camera for recording on flat film, automatic exposure meters, and the ability to display images on a screen with a CCD-camera.
Applications: The TEM-100 is used in medical research, such as studying rat muscle tissue.
See more

Catalog excerpts

TEM-100-1

high quality electron microscopic images; easy control the device using the computer; existence high contrast mode for biomedical objects; original design vacuum camera; easy and reliable vacuum system; output electron microscopic images on the screen using CCD- camera and image editing with special programs. Technical Specification: Parameters Basic Mode Contrast Mode The range of the electron-optical increases The range of the diffraction length chamber, mm TEM-100 compact transmission electron microscope for the widespread use of biomedical research, research in nano science and technology fields, as well as for the training of higher education specialists. with the adjustment steps, kV Power supply (1 phase), V Frequency, Hz Management system The microscope is controlled by a computer. Software in Windows operating environment allows you to manage the device and display an image while operating the CCD-camera. Controls allow work on the device with minimal distraction of the operator on the monitor screen. Boards can move that allows the operator more convenient to place them on the table. Photographic system • The microscope may operate in the following modes: low magnification; large increases in the ground or contrasting modes of operation; microdiffraction mainly or contrasting modes. The microscope is designed for indoor or partially conditioned air conditioned at a temperature of (293 ± 278) ° K and relative humidity (65 ± 15)% at a temperature of (293 ± 278) ° K . Power supply - single phase is 220 V, frequency 50 Hz. vacuum camera with recording on a flat film measuring 90×120 mm or 80×100 mm; automatic photographic exposure meters; on the film indicated the experiment number and an increase in the length or the camera (for more information about the image is stored in the database of the computer); the ability to install the lower image display system on the screen with the CCD-camera. Research in medicine: rat muscle tissue More information! Please contact us [email protected] MicrOptik |Custom built analytical technology | www.microptik.eu | Buys Ballotstraat 8-207, 4507 DA Schoondijke, Netherlands | T +31486416240 C+31

 Open the catalog to page 1

All Microptik BV catalogs and technical brochures

  1. FTIR 7600

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.