Miramhoo Multifunctional Diode Laser+Nd Yag laser 2 in 1 System User Manual

Chapter 1 Installment Chapter 2 Operating of screen Chapter 3 How to use it? Chapter 1 Installment Whatsapp 0086 13051281013

(Picture 1) Connect the pico laser handle, like the picture1 (Picture 2) Connect the diode laser handle, like the picture2 2. Add water (1). Water source: pure water or distilled water; (2). Screw off the caps of water inlet and water spilt at the same time;

www.miramhoo.com (3). Take advantage of water pipe and water funnel to input water (4). How to know enough water input? Please observe water spilt, water spill automatically from the water spilt, means enough water input. (5). Draw out water pipe and water funnel, do not tighten screw caps till good water circulation Note: a. Be sure to use pure water and distilled water b. Change water every 3 months approximate 3. Plug the power cord 4. parts, including the replaceable heads Whatsapp 0086 13051281013

Chapter 2 Operating of screen Enter interface:

-1 Choose the hair removal Choose the treatment parts and skin color Set the parameter on this screen page

Can choose different skin types from type Ⅰ to Ⅵ

，then press to set the frequency, after setting the parameter, then press， , It enter into ready condition 2)If click Picolaser, you can enter the infterface as follow:

Choose the wavelength and setting the parameters Energy: 100-2000mJ adjustable Frequency:1-10Hz The 1064nmprobe is mainly used to remove the colour like blue and black. The 532nm probe is mainly to remove the red and brown tattoo.

a. In operation, vertically slide the probe on skin with balance force, make sure the probe touch skin firmly. b. Press button on handpiece or step pedal after the probe close touch on skin, avoid electric shock. c. Increase speed of probe sliding step by step, avoid burn skin, as long time treatment, the probe may create bigger heat on probe accordingly. d. Keep spot of overlap 1 - 2mm, Overlapped shoot makes sure to good effects of treatment area. a. Customer should not open eyes during treatment b. Keep frequency as 3 - 5 we recommend and able to adjust as actual treatment request,and control...

Install 1320nm black doll probe Do treatment with some gestures, please do not keep the shot on same area for long time, keep it moving on skin slowly.