M8 RF Crystallite Please be sure to read the instru

A.Product Description Welcome to choose the latest product of our company,Crystallite Depth 8, also known as gold RF Crystallite beauty instrument, crystallite depth 8 is a new high-end medical minimally invasive skin beauty artifact, which combines RF+ insulating microneedle + dot matrix technology device of. The device is equipped with interchangeable 4 different probe configurations (12p, 24p, 40p, nano-probe), and the system can be freely adjusted to set the insulating Crystallite head to penetrate into the skin at different depths of the target tissue (between 0.5-7mm), providing Minimally...

B.Working Principle Crystallite Depth 8 is a minimally invasive fractional treatment combining microneedles and RF energy.Under the control of the electronic system, dozens of insulated needles quickly penetrate the epidermis at the same time, emit RF energy from the needle tip, and then quickly exit the skin. RF energy is penetrated deep into the skin through tiny needles, causing tiny damage, penetrating and opening the absorption channel of the skin, so that nutritional products can enter the skin, and trigger the body's natural healing response. At this time, the thermal stimulation generated...

C.Mechanical Movement Diagram Fixed mode exercise icons: Close skin. Motorized microcrystals penetrate 2.5mm into the skin. Output RF energy, the heat can continue to transmit the skin up and down 1mm. Crystallite exit the skin. Explosive mode exercise icon: Motorized microcrystals penetrate 7mm into the skin. Output RF energy, the heat can continue to transmit the skin up and down 0 . 5 - 8 mm. Continue to retract to 5mm, and then output RF energy, heat transfer 0.5-6mm. Continue to retract to 3mm, and then output RF energy, heat transfer 0.5-4mm.

Crystallite Depth 8-Explosive Mode (Multi-level Mode): Customizable multipuise settings: Solidificalion Subnecrosis While the system automatically releases energy, the "Explosive Mode" RF technology can instantly release energy at three different depths under the skin. Multi-level fixed-point superposition treatment, energy delivery is uniform and stable.

1 . Double handle design,wide range of treatment. 2.A variety of probe specifications^ 2P, 24P,40P, nano crystal head, more peace of mind without repetition. 3 .Provide the deepest RF fractional the rapy which can penetrate subcut -aneous tissue up to 8mm. 4.Realize humanized operation:the depth can beadjusted between 0.5 and 7mm,the depth of the needle can be adjusted freely,and it can be used on skin of any thickness. 5.Original burst mode:deep segmented subcutaneous heating technology,multi.levelfixed.point superposition treatment at onetime, uniformand stable energy delivery. 6.Insulated...

1. Installation steps:® Install the hanger on the device.©Connect the handle to the handle socket on the back of the device, align and insert it and put it into the hanger;®Connect the foot switch. 2. Insert the power cord into the rear socket of the device, turn on the power and turn on the power switch, and then press the power button to start the device. Handle -Hanger •Foot switch: It is operated by foot or foot switch, which also controls energy output and emission. Step on the foot switch to operate it. •Click the " o " start button on the system interface to indicate that the system is...

• Standard 4 types of microcrystal heads (1 Op, 24p; 40p, Nano) 12p: For small or smaller treatment areas. 40p: For use on body parts for larger and deeper tissue treatments. Nano crystal head: The introduction enhances and tightens. Note: The treatment tip is for single use only. Repeated use can easily lead to cross-infection. (If there is any problem with the secondary use, it has nothing to dc with the company).

4. Probe installation is shown in the figure below: ⑴As shown in the figure, match the probe with the handle to the card slot, align it in a straight line, push and press to insert the probe, press the buckle to fasten it and fix it. Buckle up Correspond Card Slot 5. Instructions for using credit card: • Each card is limited to 15 swipes (card swipes). It is counted once every time it is turned on, and there is no limit to the usage time. If you turn it on again after shutting it down, you need to enter the working system to swipe the card to use it. • This card is an inductive smart card. Please...

I. System Interface Button Introduction 1. Check whether the connection of the machine is normal, connect the machine to the power supply and turn on the power switch, press the power button and the machine will start up immediately, and the Boot system shown in Figure 1 will appear, click the picture and then enter Figure 2 to select the operating system. Figure 1: Boot System 2. Choose to set the operating system in Figure 2: ⑴Select the corresponding face/neck or body icon according to the treatment site; ⑵Select the corresponding probe icon according to the currently used treatment probe,...

3.In Figure 2, select the settings " " Face/Neck icon, and then click " " to enter the body operating system in Figure 3. Figure 3: Face/Nack Operating System Back Button Pause/Start Operating Hour Energy Depth Single/Double Mechanism Record Operation Number Show Probe Type Version Code Display the remaining number of swipes M1-M5: 5 Parameter Save Modes (Click the save button) ①Swipe the card to activate-Enter the working system interface and the E2 tips "Please swipe the card" appears. Please put the card in the card swiping sensing area of the host and tap it. When you hear the "beep beep"...

to add and subtract adjustments, range 0.5-2.5mm,Each increment is 0.1mm. Adjust the setting depth according to the skin thickness of the treatment area to provide effective subcutaneous treatment. • 【 Mechanism Settings,click【 【 ”:Single/Double shot 】to add and subtract switching settings. 】The blank displaying“ ”indicates that the single-shot mechanism is currently set. As the name suggests, single-shot means that the microneedle works once when the foot switch is stepped on. This single-shot mechanism means that the microneedle is fired once by stepping on the foot switch. After the microneedle...