Fractional CO2 Laser Beauty Machine BG319 User Manual

IMPORTANT: before starting the equipment correctly, please follow the installation instructions. Any damages caused by incorrect operations will void the warranty. Safety Information: Thank you for choosing our products! This user instruction is specially designed for the safety of you and others. Please read the instructions carefully before installing or using the machine and follow them when using. The company does not take any responsibility for any accidents and problems caused by improper operation or mistakes, excluding quality problems. Electrical Safety Before installing the machine,...

1. Working Theory The CO2 laser is a gaseous laser with a wavelength of 10.6 μm that is fully absorbed through human biological tissue (all skin available). The sealed-off fractional CO2 laser, whose output laser-light is delivered through an articulated arm, which has better direction and higher energy density. The CO2 laser operates in the invisible infrared waveband, and an aiming beam is required to see where the treatment beam will impact tissue more recently from a visible red diode laser. When the laser beam go through the focus lens, the produced heat will gasify the target tissue. With...

1. Articulation Arm 2. Touch Screen 3. Fractional Head 4. Ultra Pulse Head 5. Foot Switch 6. Switch 7. Key 8. Power Line Socket 9. Foot Switch Socket 10. Laser Socket 11. Air Port 12. Fan 13. Power Switch Note: The fractional head uses in fractional mode, the ultra pulse head uses in normal mode.

4. Operation (1) Interface When the key switch is turned on, the interface displays two operating modes.

① Fractional Mode Click , enter the following interface.  Select the “Power” button, click Select the “Duration” button, click Select the “Repeat” button, click Select the “Distance” button, click Adjustment range: 0.1mm - 2.6mm Select a graphic: line, square, rectangle, triangle, hexagon, circle or ellipse. The maximum area of scan is about 20 mm × 20mm. Set the size of the graphic with a magnifying glass and blue indicator. Adj

to select the scan mode: disorder, midsplit or order. to save the parameters in the specified number(1-5).  After setting the parameters, change to .  The treatment head is aimed at the treatment area and the foot switch is depressed for operation. ② Normal Mode Click , enter the following interface. Select the treatment mode: single Click adjust the working width, multiple treament and frequency. Adjustment range: single(working width): 10ms - 1000ms continuous(only multiple treatment, frequency works): 10ms - 1000ms 5

 After setting the parameters, change to .  The treatment head is aimed at the treatment area and the foot switch is depressed for operation. ③ V.T System Click , enter the following interface. Select the parameter icon, click Click to save the parameters in the specified number (1-5). After treatment, press button Return the operating arm to its natural position where it is not under stress to maintain good output stability. Remove the treatment head and other tools and take them to be cleaned and disinfected. When the machine is not in use, remove the key switch for safe keeping. , switch...

5. Cautions (1) Before Treatment ① Avoid sun exposure for 2 weeks prior to treatment and apply sunscreen as a precaution. ② Avoid aspirin-containing or aspirin-like medication for 1 week prior to treatment, unless medically prescribed. Avoid all-alcohol, fish oil-based supplements and vitamin E as far as possible. ③ Discontinue the use of skin care products containing vitamin A analogues (e.g. retinoids, Daphne (adapalene, propylene glycol and EDTA gel) or those containing fruit acids for 1 week prior to treatment and do not resume use until 2 weeks after treatment. (2) After Treatment ① Do not...

(2) Medical equipment or household appliances in close proximity to the unit may cause operational faults due to interference. (3) Prohibited to use in the following environments: High temperature and humid environments; Environments with dust; Environment with a lot of oil fumes or water vapour. (4) If a fault occurs during use, the power should be switched off immediately and must be dismantled and repaired by a professional or sent to a dealer or manufacturer for repair, not by yourself. (5) After treatment, disconnect the power supply and ensure that it is unplugged from the mains socket....