*mymedicalexpo

Catalogs
MITRA Industries
Mitra Labside Filter (WB)

Mitra Labside Filter (WB)

Product catalog summary

Overview: The document describes the MITRA-WB, a high-efficiency labside filter designed for leukocyte removal from whole blood. It is intended for use in blood banks and laboratories to ensure the quality of blood transfusions by removing leukocytes and micro aggregates.

Specifications: The filter system is designed for pre-storage leukodepletion and is most effective when used with fresh whole blood. It should not be used with blood collected more than 48 hours prior.

Instructions for Use:

Store the filter system at temperatures between 4°C and 30°C.
Ensure all tubes are free of folds and kinks, and all air vents are closed before starting filtration.
Do not reuse or re-sterilize the filter system.
Saline priming is not required, and the system should not be washed with saline after filtration.

Filtration Process:

Place the filter system in a vertical position and allow it to prime by gravity.
Verify that the inlet side of the filter is filled and blood is flowing towards the outlet side.
Open and close clamps as instructed to manage the flow of blood through the system.
Once filtration is complete, open air vents to drain retained whole blood.

Precautions:

Do not use the system if the packaging is damaged or if any protective components are missing.
Follow all instructions carefully to ensure proper operation and safety.

Manufacturer Information: The filter is manufactured and marketed by Mitra Industries Private Limited, located in Faridabad, Haryana, India. Contact information and certifications (ISO 13485:2016 and ISO 9001:2015) are provided for quality assurance.

Catalog excerpts

Experience Peace of Mind High Efciency Labside Filter for Leukocyte Removal of Whole Blood(WB) ...complete solution for BLOOD transfusion services

Open the catalog to page 1

Filter with Empty Transfer Bag for Labside Leukodepletion from Whole Blood(WB) MITRA-WB, Leukodepletion system with high efciency to remove leukocytes and micro aggregates up to 1 unit of whole blood in blood bank & Laboratary (Fig-1). CAUTION: Ÿ Please follow the instructions carefully. Ÿ Do not reuse or do not re-sterile. Ÿ Do not use it if the packing is damaged or the nal protectors were lost or displaced. Ÿ Make sure all the tubes are free of folding and kinking. Ÿ Make sure all the air vents are closed before starting the ltration process. Ÿ Store at temperature between 4° to 30°C. 30°C...

Open the catalog to page 2

All MITRA Industries catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list