Medizin- und Labortechnik Engineering GmbH Dresden Cyanide analyzer The Cyanide analyzer consists of an autosampler and a FIA Nexus device with integrated digestion unit for the selective release of cyanide from metal complexes according to the flow injection method DIN EN ISO 14403-1 which describes the pyridine-free determination of free and total cyanide. Gas diffusion of the released cyanide in a membrane cell eliminates possible interferences caused by the sample matrix. As the membrane transfer is carried out with stationary acceptor solution, this leads to an enrichment of the analyte and a high sensitivity of the method. The digestion unit of the FIA Nexus device is controlled by the FIAStudio software. Measurement ranges: Free cyanide: 0.001 … 1 mg/l FCN Total cyanide: 0.001 … 1 mg/l TCN By adjusting the enrichment time and the gas diffusion cell, the measurement range can be adjusted to customer requirements. MLE Medizin- und Labortechnik Engineering GmbH Dresden Bernhard-Voß-Str. 27, 01445 Radebeul Telefon (0351) 833810, Telefax (0351) 8338111, Email: [email protected] , Internet: www.mle-dresden.

Medizin- und Labortechnik Engineering GmbH Dresden The control of the one or multichannel FIA system is carried out by the Windows-based FIAStudio software. In addition, it is used to record, process, manage and archive the measurement data. An export function for transferring the measurement data e.g. to a laboratory information and management system (LIMS) is also part of FIAStudio. If possible, the analytical methods used are flow analysis procedures standardized in accordance with DIN EN ISO. The measurement ranges of the individual parameters are listed in the method list. The variance coefficient...