Manufacturer: MOBILEX A/S Gr0nlandsvej 5 DK-8660 Skanderborg Denmark www.mobilex.dk

1. General information Dear customer, This user manual contains a description of the medical device and important guidances to ensure a correct and safe usage of the product. It is important prior to use to read this manual carefully. It is especially important to read the safety requirements and follow these. We continuously develop our products and we reserve the right without further notice to change the specifications and functions of products. Intended use of the device The Mobilex Product is medical device which is intended to be used only as seating support by individuals who require such...

Mobilex A/S Grønlandsvej 5 DK-8660 Skanderborg www.mobilex.dk Back frame’s assembly/disassembly tightening bolt Elevable armrest Soft PU seat with detachable middle part for defecation Swing-away, detachable leg rest and it’s locking lever Detachable excrements’ bucket Leg rest's length adjustment bolt Elevable Footplate Wheel with pedal brake Assembly description With looking on the picture above the device should be assembled in quite instinctive way. We recommend you to follow below steps: ● In the first place take all chair’s elements out of the box and check with the list from above if nothing...

Mobilex A/S Grønlandsvej 5 DK-8660 Skanderborg www.mobilex.dk Function description ● To engage the brakes step down with your toes on the pedals attached to the rear part of each wheel until they are locked. To disengage the brakes pull up the pedals with your toes until they will unlock. You should always engage the breaks when you don’t plan to move the chair. Never leave chair without breaks engaged when there is someone sitting in it! Never leave chair on slopes without breaks engaged! You can adjust the length of the footrests to match the user's height. Release the leg rest’s length adjustment...

Mobilex A/S Grønlandsvej 5 DK-8660 Skanderborg www.mobilex.dk Accessories It is possible to replace rear small wheels with 24” big rear wheels with push-rims for self propelling. Assembly of this kind of wheels requires also mounting of typical wheelchair brakes. It is all included in the accessory kit no. 302017. Wheels replacement description: Fixing Bolts for Assembly Plate 24” wheels Assembly Plate 24” wheels axle”s Quick Release Button Rear Standard Wheel Disassemble 2 rear Standard wheels in the way opposite to previous assembly instructions. Fit the 24“ wheels assembly to the rear vertical...

• Move the sliding profile to find the optimum position of the brake, so it is quite easy to apply the brake when necessary, but the friction between tire and the friction rod is strong enough to efficiently hold the wheelchair in stationary position. • Tie the fixing bolts, so the brake is stable and fixed. • Repeat those steps for the other side of the chair. • To apply the brakes simply push the Brake Lever towards front of the chair. To release brakes pull the lever towards back of the chair. Product label The product label is located in the bottom of the frame Shower chair i \ Max. 150 kg...

Warning! When using the chair in very calcareous water calcium binding might occur at wheel bearings and other movable parts. Under such circumstances it can be necessary to use lime solution and afterwards to use lubrication. Warning! When using the chair in chlorinated surroundings an extra strong corrosion will occur and guaranty will no longer be effective. 7. Disposal of the product The product can not be disposed of with household waste but must be brought to the local recycling centre. 8. Guarantee terms Mobilex A/S offers 2 years of guarantee for failures caused by errors in production....