Tethys HMD | Mocom

Product catalog summary

Introduction
The document provides technical specifications and operational details for the Tethys HMD, a handpiece thermal disinfector accessory for the Tethys H10. This accessory enhances the functionality of the Tethys H10 by enabling it to wash, thermally disinfect, and dry up to six instruments simultaneously.

Specifications and Equipment
The standard equipment includes four turbine adapters, three micromotor handpiece adapters, one scaler tip adapter (with three tips per adapter), and four plugs. The thermal disinfection process operates at 90°C, with a total cycle time of 34 minutes, including washing, thermal disinfection, and drying phases.

Cycle Description
The handpiece cycle consists of four phases: washing with detergent, rinsing, thermal disinfection, and drying. The thermal disinfection effectiveness is verified according to EN15883-1 and EN15883-2 standards.

Flexibility and Compatibility
The support for the handpiece cycle is easily assembled and removed, allowing the Tethys H10 to maintain its original function as an ultrasound thermal disinfector. The HMD is compatible with all existing Tethys H10 units, requiring only a firmware update.

Adapters and Instrument Treatment
Specific adapters are available for treating turbines, micromotor handpieces, and scaler tips. Proper instrument treatment is ensured by fitting the appropriate adapter for each instrument type.

Conclusion
The Tethys HMD accessory significantly enhances the capabilities of the Tethys H10, providing a comprehensive solution for the thermal disinfection of dental instruments.

Catalog excerpts

Thermal disinfection time Total cycle time Handpiece cycle Standard equipment - 4 turbine adapters - 3 micromotor handpiece adapters - 1 scaler tip adapter (3 tips per adapter) - 4 plugs BU Medical Equipment Sede legale ed amministrativa Headquarters Cefla s.c. Via Selice Provinciale, 23/a 40026 Imola - Bo (Italy) tel. +39 0542 653111 fax +39 0542 653344 Stabilimento Plant Via Bicocca, 14/c 40026 Imola - Bo (Italy) tel. +39 0542 653441 fax +39 0542 653601 According to the standards in force, in extra-EU areas the availability and specifications of some products and/or characteristics may vary. Please contact your local distributor for further information. Washing time Thermal disinfection temperature Cycle description Due to our policy of constant technological upgrading, technical specifications may be subject to change without prior notice. Technical specifications Revolutionary Evolut

Open the catalog to page 1

Thanks to the new HMD, Tethys H10 is now also a handpiece thermal disinfector Adapters for every requirement Users can treat the following instruments: - Turbines - Micromotor handpieces - Scaler tips This latest accessory makes it possible to wash, thermally disinfect and dry up to 6 instruments (turbines or micromotor handpieces) simultaneously. The HMD is compatible with all Tethys H10, including those that have already been installed. All the user has to do is update the firmware to make the thermal disinfector more complete than ever. To ensure proper instrument treatment all you need to...

Open the catalog to page 2

All Mocom catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list