D VE 5 1 00/5200 and D VE 7 1 00/7200
20Pages

The medical supply units DVE 5100/5200 and DVE 7100/7200 Pendant systems with basic support heads/equipment carriers for: OP - surgery OP - anaesthesia intensive care modul technik GmbH medical supply systems and equipment

0 arranged optimallyoftothe pendant systems can be The arrangement suit the use and treatment requirements. 0 pendant- beam, single- or double-arm 0 pendant- beam, single- or double-arm duo 0 electromotive swivel support, elastic force or Height- adjustable 0 pendant length 600 / 800 / 1000 or 1200 mm 0 on configurationof ceiling swivel support depending Maximum load 0 Swivel range of pendant 340° 0 support joints with the pendantvalves swinging Pneumatic brakes in and operation on the equipment console or basic support head. 0 The medical, ceiling-suspended Supply Unit, series DVE...

0 The Usability The Multimovement Pendant offers optimal freedom of movement at the work place due to ist height adjustability. 0 The Flexibility Pendant can be configured as The Multimovement a single or dual arm system - according to the requirements of mobility: - Single arm system with motor arm or spring arm - Dual arm system with motor arm/ spring arm and extension arm 0 Smooth-running positioning pendant system can Due to little manual forces the be positioned easily. Pneumatic brakes ensure that the selected position is retained. Dampened stops prevent a “harsh” impact. 0 Highest...

Basic support head BSP 2500-DVE 0 headmodular design concept ofcan offer individual The the new support generation means that we solutions to suit every type of therapy and concentration of equipment required. 0 The basic and BSP 2600-DVE, means series wide support head generation, BSP 2500-DVE that a range of national and international products can be integrated. 0 five levelssupport headcomponents for high current The basic BSP 2500-DVE is vertical in with in-built and communication current, medical gas technology for medical pressurized gases, vacuum, anaesthetic gas systems (AGSS) and...

Basic support head BSP 2600-DVE 0 can be fitted vertically on three levels with inbuilt The basic support heads, series BSP 2600-DVE components. 0 which can range of medical supply unit solutions We offer a be placed next to and connected up to the patient, and which incorporate possibilities for high and low current equipment installations and medical gas supplies. 0 valves which operate thethe pneumatic control In the standard model, joint brakes are either integrated into the basic support head or equipment carriers, the basic support heads can be fitted with operating handles and...

0 The equipmentwith installationfitted horizontally onand carriers can be the different levels elements for power communication components and supply points for medical compressed gases, vacuum, anaesthetic gas systems and supply points for the supply and extraction of air for the operation of surgical tools. 0 180° is fixed with a stopper.the equipementmovement The rotational movement of carrier +/The rotational is limited by a pre-installed friction brake which can be adjusted by the user. 0 H=210, D=450mm,BSP 2500-DVE-Tr,equipped on the Equipment head measurements 735mm, can be front and...

+ optional Equipment High Current Technology 0 2600-DVEsupport heads, seriescarrier2500-DVE / BSP The basic BSP and the equipment BSP 2005-DVETr/ BSP 2600-DVE-Tr are fitted with electrical sockets (230 V/16 A with control light and labelling panel) as well as CEE-sockets (230 V / 16 A 3-pole, 400 V / 16 A 5-pole) as standard. Model, number and type of circuit, as well as the mains supply, are effected depending on the project. Voltage compensation sockets according to DIN 42801 can be assigned respective the number of sockets. (According to each project the equipment is fitted with power...

+ Optional Equipment Medical Gas Technology 0 ready to use the project, thesupply pointssupplied Depending on systems are with installed for the medical pressurized gases, vacuum, anaesthetic gas systems (AGFS) and supply points for the supply and extraction of air for the operation of surgical tools (Air Motor) in compliance with DIN EN 737-1 and DIN EN 737-4. Any of the makes available on the market are possible, e.g. DRÄGER, GREGGERSEN, HEYER, MEDAP as well as country-specific makes. 0 in the basicpoints areheads (cantobestandardon the front The supply installed on the rear support...

0 accessories, which can behas an modularly torange the modul technik GmbH extensive of added suit individual requirements of the workplace. Why not ask for a copy of our Accessories Catalogue? 0 Beambasicdrip equipment for the BSP 2500-DVE/BSP for The support heads 2600-DVE series are fitted on both side with carrying beams, Ø 30 mm, of stainless steel to receive extendable drip carriers in standard lengths: 1000, 1200, 1400 and 1600 mm, as well as other equipment components. 0 Halogen lamps HX 35 TM 12V / 35W, bracket 430 + 420 with two setting switches, mm, with integrated transformer,...

0 Drawer module fixes on to console. With plastic drawers on roll bearing pull-outs, can be removed for cleaning, model and choice of modules according to project requirements (up to three drawer modules). Measurements W x D x H 500 x 430 x 135 mm. 0 fixes on tomodule with pull-out keyboard on roller Keyboard console, system with groove for writing utensils. Measurements W x D x H 500 x 430 x 100 mm. Equipment console with drawer module/ keyboard module 0 fixes ondesk with pull-out writing board for DIN Writing to console A3 journals, affixed to rolling pull-outs. Measurements W x D x H 500...

terface plate jfi | [:ji_i_gi_, inlet intermediate ceiling

I—Rbl = fiction brake -HF = adjustable elevation spring tension -HM = adjustable elevation Engine

-HM = adjustable elevation engine

finished floor finished floor medical gases equipment requirements max. load each console 40 kg

finished floor finished floor medical gases equipment requirements max. load each console 40 kg