modulux 2008
8Pages

nursing homes technik GmbH supply systems

Modulux 2008 NP for standard care 0 The medical supply units were designed of the Modulux 2008 systems range specially for the nursing area in hospitals, sanitariums and for geriatric nursing. 0 Due to 2008modular construction, the its Modulux series allows flexible arrangements and combinations of the built-in components. It excels thanks to its individual scope of design and possibilities for projectoriented solutions. 0 The systems are produced from aluminium extrusion-pressed profiles and high-grade steel elements. The aluminium components can be anodised or electrostatic powdercoated,...

Combination options Modulux 2008 NP and 2008 EK

Medical Supply Unit Modulux 2008 Modulux 2008 NP for standard nursing, single-bed-type 0 The medical supply unit Modulux 2008 comes equipped with safety sockets (230 V/16 A with terminal for the med. gas supply 0 Thetime of manufacture) is accessed via(provided at the the central control light) as standard. Number of sockets and type of circuit of the build in elements as well as the mains supply will be considered according to each project. connection point. The media terminal is normally accessed via rear, directly into the respective med. channels. The supply can be effected using a...

Lighting Technology and Medical Supply in one Compact Unit 0 The lighting modules complyartificial light and with DIN 5035-3 (interior room lighting by firms offer connection facilities 0 Specialist and patient-monitoring systems. It for monitors is, hospital lighting) and also EN ISO 11197:2005. They also fulfil the necessary quality criteria. Lighting modules for operation in rooms of user classification group 1(2) are normally fitted with a low emissions leakage choke. however, possible to make the necessary preparations for the Modulux 2008 system (normally made available to modul...

+ Lighting components 0 The examination light are for night-, reading lighting components and one compact unit. They are fully wired completely, ready for operation and exchangeable without tools by means of a three- respectively four-pin, plugin connection. + Installation by manufacturer 0 All connections for power current, signal current and communication technics are installed by manufacturer in the entrance zone of the supply unit on numbered terminal strips. Every supply unit undergoes a test for electrical safety and function by manufacturer in accordance with VDE-rules. + Entrance 0...

+ Planning 0 The company modul technik GmbHhelp with and our factory personnel are available to planning from the outset of the project. Once building plans and drafts are made available, we can provide customer-specific information regarding spatial requirements and the system dimensions modul technik GmbH will produce CAD drawings containing all the necessary information concerning component parts with in-built elements for power current-, communication- and med. gas technology. This service is offered to ensure that a clear assessment can be made in the precon-struction stages of the...

+ Variants of fittings + indirect room lighting, 2 x 36 W VVG respectively 2 x 36 W EVG 0 lighting tubes 2 x 36 W T8, Ø 26 mm + indirect room lighting, 2 x 39 W EVG 0 lighting tubes 2 x 39 W T5, Ø 16 mm + indirect room lighting, 2 x 54 W EVG 0 lighting tubes 2 x 54 W T5, Ø 16 mm + indirect room lighting, 1 x 55 W EVG 0 lighting tube 1 x 55 W TC compact fluorescent lighting fixture + reading light, allocated to the bed place, 1 x 18 W VVG respectively 1 x 18 W EVG 0 lighting tube 1 x 18 W T8, Ø 26 mm + reading light, allocated to the bed place, 1 x 36 W EVG 0 lighting tube 1 x 36 W TC...