Modus QA - Product Data Sheet - Penta-Guide Tilt Plate
1Pages

Verify Image-Guided Shifts for Six Degree of Freedom Couches Introducing QUASAR™ Penta-Guide Tilt Plate, an easy and efficient way to verify couch corrections for six degree of freedom (6DoF) couches. SPECIFICATIONS Tilt angles are: 0.75º, 1.25º, and 1.0º Turning the tilt plate in 90º increments varies the direction of the rotation corrections Compatible with new and existing QUASAR™ Penta-Guide Phantoms Features a precision cut out to accommodate most localization bars The QUASAR™ Penta-Guide Tilt Plate was designed as an accessory to the QUASAR™ Penta-Guide Phantom to facilitate the daily QA of linear accelerators equipped with 6 degree of freedom couches. The QUASAR™ Penta-Guide Tilt Plate positions the QUASAR™ Penta-Guide Phantom at known rotation angles and displacements relative to the isocenter. With this device, users test rotation corrections and combined translation and rotation corrections on a 6DoF couch. The central lines, in each group of three, align the center of the Phantom with the laser isocenter for rotation only corrections. Other lines require translation and rotation corrections. QUASAR™ Penta-Guide Tilt Plate OPTIONAL ACCESSORIES Above: The QUASAR™ Penta-Guide Tilt Plate verifying the couch correction on a six degree of freedom (6DoF) couch at known rotation angles and displacements relative to the isocenter. QUASAR™ Penta-Guide Phantom QUASAR™ Penta-Guide [Enterprise] Software QUASAR™ Hood for Frameless Array © 2016 Modus Medical Devices Inc. All Rights Reserved. Specifications subject to change without notice. Modus QA is not responsible for errors or omissions. Modus QA makes no warranties or commitments concerning the availability of future products or versions that may be planned or under development. PDS#500-3503 REV#01.20