A Laboratorio Pesaro product WORKTOPS & SINKS IN TECHNICAL CERAMIC FOR ALL KINDS OF LABORATORIES 2018 / 2019

WORKTOPS & SINKS IN TECHNICAL CERAMIC FOR ALL KINDS OF LABORATORIES We have sixty years of experience in the manufacturing and sale on a global scale, meeting the regulations and design procedures of each Country. We pay special attention to the technical and aesthetic needs of each lab space, offering a customised service. Argentina Belarus Belgium Bulgaria China Columbia Czech Republic England Estonia France Germany Greece Iran Ireland Israel Italy Japan Jordan Kuwait Latvia Lithuania Malaysia Mexico Poland Portugal Romania Russia Saudi Arabia Serbia Slovenia Spain Switzerland Thayland Turkey United...

OUR WORK IS A WORK IN DEPTH Worktops and edges shaped with cleverness and research to meet every need. COLOURS FOR A GREEN LIFE Energy and personality in 28 hues, to enjoy a high quality work place environment compatible. PLEASANT DESIGN LABS Personalized solutions, high performance and Autocad design. THE ART OF WORKMANSHIP Worktops with a variety of drill-hole shapes, raised, edged, and with customised thicknesses.

The Technology “ New techniques and production procedures have been applied to ceramic.” • MONOLITE IPERGRES® is a technical ceramic mixture, chemical-technical stoneware, that is single fired at high temperature (1230-1250° C). • MONOLITE IPERGRES® Technical Ceramic is manufactured from natural earth resources as clay, kaolin, feldspar and quartz. • All the benchmarked materials are “natural” and the production technology has low environmental impact, with absence of any pollutant: “green building” concept. • After a complex and severe research, experimentation on working process and severe...

• The worktops are completely self-supporting and do not require structural frames. • The product features a rim against overflows along all four sides; any worktop can be used individually or as a part of a combination together with others. • In order to have non standard length, worktops with a rim against overflow on all four sides can be cut and assembled "side by side". • The worktops are supplied with a frontal glazed edge and the remaining edges can be cut to the desired size; the two short edges are finished with a special cold-applied enamelling of the same hue of the worktop. • Worktops...

NAME OF SURFACE SAMPLE OR MATERIAL TESTED Green - no visible effect Yellow - slightly visible stain Orange - stain Red - perceivable cracks on the surface

NAME OF SURFACE SAMPLE OR MATERIAL TESTED

Six Points for the Best Choice 1 2 MONOLITE IPERGRES® has shown to be strongly resistance to indirect tensile stress through flexural test. Its mechanical high features makes possible to optimize structural performances and at the same time to low weight of products. MONOLITE IPERGRES® has high thermal stability and excellent performances. It is thermal shock resistant to open flames and hot devices, it is also frost-proof and non-flammable (Euroclass A1). MONOLITE IPERGRES® fully vitrified and glazed surface cannot absorb grease and liquids, maintaining the surface hygienically clean. The technical...

The Department for Territory and Geological Resources of the Politecnico in Turin and the Ceramic Centre in Bologna have carried out some physical and mechanical tests on MONOLITE IPERGRES® samples with these results:

The Department of Industrial Engineering and Mathematical Sciences of Marche Polytechnic University of Ancona has carried out several physical and mechanical test on MONOLITE IPERGRES® technical ceramic. These tests have deepen verified MONOLITE IPERGRES® features to identify reliable performances and parameters to be use in FEM (Finished Element Method) analysis. We have been able to tune a customized a FEM simulation software to estimate the Maximum Static Load to apply on a worktop surface in safety conditions. Safety conditions means that all strengths in the product sections must be less...

Mechanical Performances: results for three types of worktops To simulate the behaviors of the three sections, A-B-C, three different lengths of worktops, 1200 1500 and 1800 mm, have been analyzed under load using our MONOLITE IPERGRES® customized FEM software. SECTION A 12+8 mm 4 support 4 SUPPORT – MAXIMUM LOAD 6 SUPPORT- MAXIMUM LOAD Maximum Load [N] Maximum load [Kg] Maximum Load [N] Maximum Load [Kg] Top length [mm] Carico centrale (4 Top length appoggi) Carico [mm]laterale (4 appoggi) Central load (6 support) Lateral load (6 support) 6 SUPPORT – MAXIMUM LOAD 4 SUPPORT- MAXIMUM LOAD 900 9000...

Informations based on in-house and Worldwide Customers' Tests June 2018. Informations provided intend only to show MONOLITE IPERGRES® wide but not valid as guarantee in any way. Customers are kindly asked to conduct their own tests for specific needs and applications.

CLASSIC Colours CODE

CONTEMPORARY GLOSSY Colours CODE LIGHT GREEN LIGHT BLUE

CONTEMPORARY SATIN Colours CODE

Effectiveand longlasting,simple microbiological sanitation even using detergents with low environmental impact. High resistance to acid, bases and organic solvents. Wide range of solutions, glossy colours and sizes. The BIO-LOGIC new range is the glazed work surface which provides a universal ultimate performance in the chemical, biological and health laboratory environment.

MONOLITE IPERGRES FRONT EDGE TYPES 15 25 15 20 AA GLAZED EDGE A CUT AND COLD ENAMELLED EDGE A CUT EDGE MONOLITE IPERGRES® stoneware mixture is exclusive: structural, chemical and tactile high performance. Each raw material is absolutely sustainable and free of any harmful substance. BIO-LOGIC WORKTOPS are ultra thin but high resistant, optimized for medium mechanical stresses working conditions. The product features a rim against overflows along all four sides. LOWER VIEW HIGH-TECH HOOD glazed surfaces have a thickness of only 10 mm and they can be used as acid-resistant inner coatings...