Body Transporter and Removal Cots
22Pages

{{requestButtons}}

Catalog excerpts

Body Transporter and Removal Cots - 1

4 BODY TRANSPORTER & REMOVAL COTS BODY TRANSPORTERS BARIATRIC CARRIERS C-ARM ACCESSIBLE CARRIERS COVERED CADAVER CARRIERS AUTOPSY CARRIERS

Open the catalog to page 1
Body Transporter and Removal Cots - 2

BODY TRANSPORTER & REMOVAL COTS MODEL 600000-SS STAINLESS STEEL w/T3615-R Tray MODEL 600000-SS STAINLESS STEEL w/T3603 Tray MODEL 600000-P POWDER COATED w/T3614-R Tray MODEL 600000-P POWDER COATED w/T3603 Tray Model 600000-SS Stainless Steel Model 600000-P Powder Coated Steel The unit is designed to lay flat for a dressing procedure and tilt for embalming. A handle is provided and when lifted, tilts the platform and automatically engages the positive locking brake-leg mechanism. The subframe shape permits the simple lifting on or off of the operating platform, no mechanical fastening...

Open the catalog to page 2
Body Transporter and Removal Cots - 3

BODY TRANSPORTER & REMOVAL COTS MODEL 600009 BARIATRIC CARRIER CHASSIS TRAYS CAN BE MODIFIED TO MEET CUSTOM SIZE REQUIREMENTS MODEL 600009-TL TOTAL CASTER LOCK TRAY INCLUDED AND PERMANENTLY ATTACHED The unit is designed for use with oversize cases. Every facility should have at least one of these units available for these extreme situations. STANDARD DESIGN FEATURES OPTIONAL FEATURES • Total caster locking system • Custom working heights • Custom tray sizes STAINLESS STEEL FRAME ASSEMBLY (4) 8/20 CASTER w/BRAKE All measurements in inches/centimeters TAPERED END FOR USE w/STANDARD AUTOPSY...

Open the catalog to page 3
Body Transporter and Removal Cots - 4

BODY TRANSPORTER & REMOVAL COTS Every facility should have at least one of these units available for these extreme situations. The unit is specifically designed for oversize patients with an added weight capacity. Unit features stainless steel construction and adjustable elevation via a special hydraulic hand crank mechanism. STAINLESS STEEL TRAY TAPERED END FOR USE w/STANDARD AUTOPSY STATIONS 84/213 3.5/8 27.5/69 (at the lowest height) TO 33.5/85 (fully extended) HYDRAULIC CYLINDER 30.5/77 (at the lowest height) TO 36.5/92 (fully extended) HAND CRANK STAINLESS STAINLESS STEEL STEEL SHELF...

Open the catalog to page 4
Body Transporter and Removal Cots - 5

BODY TRANSPORTER & REMOVAL COTS MODEL 600010 STRETCHER/CADAVER CARRIER Designed for multi-purpose use in hospitals, coroner’s facilities and mortuaries. The unit is a durable and economical stainless steel body transporter. STAINLESS STEEL TRAY STAINLESS STEEL FRAME ASSEMBLY OPTIONAL FEATURES • Total caster locking system • Custom working heights • Custom tray sizes • Adjustable height • Full side bumpers All measurements in inches/centimeters (4) 8/20 CASTER w/BRAKE 411 North Aerojet Avenue Azusa, CA 91702 Tel (800) 410-0100 • (626) 334-1471 Fax (626) 334-1704 www.mortechmfg.com ISO 9001:...

Open the catalog to page 5
Body Transporter and Removal Cots - 6

BODY TRANSPORTER & REMOVAL COTS The unit is specifically designed for use with c-arm style x-ray machines. The open frame construction allows the c-arm clear travel nearly the entire length of the carrier. The carrier allows the case to remain on one tray for both the x-ray and autopsy procedures. MODEL T3603 TRAY FOR X-RAY USE 1.5/3 DRAIN & #9 PLUG STANDARD DESIGN FEATURES • Frame fabricated from 2 in./3 cm. X 3 in./7 cm., .12 tubing thickness, 304 stainless steel tubing • Top tray holder fabricated from 1 in./2 cm. stainless steel tubing • The carrier is designed with a 2 in./5 cm....

Open the catalog to page 6
Body Transporter and Removal Cots - 7

BODY TRANSPORTER & REMOVAL COTS MODEL 600014 C-ARM ACCESSIBLE AUTOPSY CARRIER The unit is specifically designed for use with c-arm style x-ray machines. The open frame construction allows the c-arm clear travel nearly the entire length of the carrier. The carrier accommodates our x-ray type autopsy tray which allows the case to remain on one tray for both the x-ray and autopsy procedures. MODEL T3603 TRAY FOR X-RAY USE STANDARD DESIGN FEATURES • Fabricated from 1.5 in./3 cm. square, .12 tubing thickness, 304 stainless steel tubing • Top tray holder fabricated from 1 in./2 cm. stainless...

Open the catalog to page 7
Body Transporter and Removal Cots - 8

BODY TRANSPORTER & REMOVAL COTS UNIT WILL HOLD T3614 OR T3615 TRAY The unit is designed for use with our stainless steel cadaver trays. It is economically priced yet it still performs well under heavy duty use. MODEL T3614 STAINLESS STEEL TRAY STANDARD DESIGN FEATURES STAINLESS STEEL FRAME ASSEMBLY OPTIONAL FEATURES • Total caster locking system STYLES AVAILABLE 600015 standard autopsy carrier (Permanent slope of 1.5 in./3 cm) 600015-C carrier with rear elevation (Adjustable up 6 in./15 cm) 600015-FRC carrier with front & rear elevation (Adjustable up 6 in./15 cm) 600015-H carrier with...

Open the catalog to page 8
Body Transporter and Removal Cots - 9

BODY TRANSPORTER & REMOVAL COTS SERIES 600015-SC STANDARD AUTOPSY CARRIER w/SCALE DIGITAL INDICATOR The unit is designed for use with our stainless steel cadaver trays. Excellent means of transporting and of coarse, weighing your case. The unit features stainless steel construction. 1.5/3 DRAIN & #9 PLUG STANDARD DESIGN FEATURES • Fabricated from 1.5 in./3 cm. square, .12 tubing thickness, 304 stainless steel tubing • Stainless steel has a grained finish and all welds match adjoining surfaces • Permanent slope of 1.5 in./3 cm. • 8 in./20 cm. casters, all with brake mechanism • Cadaver lift...

Open the catalog to page 9
Body Transporter and Removal Cots - 10

BODY TRANSPORTER & REMOVAL COTS The unit is economically priced yet it still performs well under heavy duty use. STANDARD DESIGN FEATURES MODEL T3603 TRAY FOR X-RAY USE • Fabricated from 1.5 in./3 cm..12 tubing thickness, 304 stainless steel tubing • Top tray holder fabricated from 1 in./2 cm. stainless steel tubing • Stainless steel has a grained finish and all welds match adjoining surfaces • 8 in./20 cm. casters, all with brake mechanism • Cadaver Lift Accessible OPTIONAL FEATURES • Total caster locking system STYLES AVAILABLE 600017 Standard autopsy carrier (Permanent slope of 3 in./5...

Open the catalog to page 10
Body Transporter and Removal Cots - 11

BODY TRANSPORTER & REMOVAL COTS SERIES 600018 AUTOPSY CARRIER It is economically priced yet it still performs well under heavy duty use. The unit is designed for use with our stainless steel and fiberglass cadaver trays. OPTIONAL FEATURES • Total caster locking system STAINLESS STEEL FRAME ASSEMBLY STYLES AVAILABLE 600018 Autopsy carrier (Permanent slope of 1.5 in./3 cm) 600018-C carrier with rear elevation (Adjustable up 6 in./15 cm) 600018-FRC carrier with front & rear elevation (Adjustable up 6 in./15 cm) 600018-H carrier with front & rear elevation (Adjustable up 13 in./33 cm) All...

Open the catalog to page 11

All Mortech Manufacturing catalogs and technical brochures

  1. MODEL 600040

    2 Pages

  2. 1036-R100

    1 Pages

  3. CADAVER TRAYS

    10 Pages

  4. SINK STATIONS

    33 Pages

Archived catalogs

  1. SINK STATIONS

    28 Pages

  2. CADAVER TRAYS

    10 Pages