12 SS CASEWORK & SPECIMEN SHELVING Based Cabinets Tables, Aprons and Drawers Sections and Supports. 5 1 Slope Tops, Ceiling Filler and Casework Accessories. 9 1 ADJUSTABLE & SECURITY SHELVING SPECIMEN SHELVING TALL CABINETS ADJUSTABLE WIRE SHELVING WALL CABINETS EPOXY TOP LABORATORY WORKSTATIONS BASE CABINETS

CASEWORK & SPECIMEN SHELVING Each cabinet is fabricated of 18 gauge prime quality Type 304 stainless steel with a No. 4 satin finish. The joints on the face are a flush butt joint and heliarc welded. Welds are then ground and polished to match all exposed surfaces equal to a No.4 finish. Corners are reinforced with angles or welded as required. All exposed face rails and stiles are 1.25 in./3 cm. wide. A .75 in./2 cm. deep by .5 in./2 cm. rabbet is provided for all doors and drawers. Service access panels are removable with tools and are provided in the back of base cupboard cabinets. Each cabinet...

CASEWORK & SPECIMEN SHELVING 1.25/3 FLUSH FRONT FACE STANDARD PULL DETAIL OF ROLLER CATCH CORNER REINFORCEMENT DETAIL OF FRONT TOP CORNER OF WALL CABINETS SHELF CLIP FLUSH FRONT FACE KEYHOLE TYPE PILASTER SLOT 1/2 ON CENTER CORNER REINFORCEMENT DETAIL OF FRONT TOP CORNER OF WALL CABINETS DETAIL OF BOTTOM FRONT OF BASE CABINETS DETAIL OF REAR BOTTOM CORNER OF WALL CABINETS 4.75/12 KEYHOLE TYPE PILASTER NYLON BUSHING STAINLESS STEEL SHELF CLIP HOSPITAL TYPE 5 KNUCKLE HINGE DETAIL OF REAR TOP CORNER OF WALL CABINETS NO. 20 GA. REMOVABLE BACK (SHORT BACK IN SINK CABINETS AND NO BACK IN DRAWER CABINETS)...

CASEWORK & SPECIMEN SHELVING FABRICATION CONSTRUCTION DETAILS ALUMINUM BOTTOM RUNNER 7/32 INCH FLOAT GLASS NO. 18 GA. INSIDE BOTTOM “U” SHAPED RUBBER CUSHION STRIP RUBBER BUMPER STEEL CLIP PIN AND SLEEVE w/NYLON ROLLER ALUMINUM BOTTOM TRACK ALUMINUM BOTTOM TRACK NYLON SHEAVE ALUMINUM HANDLE DETAIL OF FRAMELESS GLASS SLIDING DOORS AND TRACK AT BOTTOM OF WALL CABINET DETAIL OF SOLID PANELS SLIDING DOORS AND TRACK AT BOTTOM OF WALL CABINET ALUMINUM TOP TRACK PLASTIC GUIDES NYLON SLIDES 7/32 INCH FLOAT GLASS 2-1/8 DOOR STILES 7/32 INCH FLOAT GLASS DETAIL OF FRAMELESS GLASS SLIDING DOORS AND TRACK...

CASEWORK & SPECIMEN SHELVING All measurements in inches/centimeters Last two digits of order number indicate cabinet width Drawer and Door Heights 31.75/80 35.25/89 A ll measurements are in inches/centimeters Refer to diagrams for handle positioning PLUS 1/2 MAX ADJUSTABLE FEET 411 North Aerojet Avenue Azusa, CA 91702 Tel (800) 410-0100 • (626) 334-1471 Fax (626) 334-1704 www.mortechmfg.com BASE CABINETS STANDING HEIGHT 35-1/4” HIGH X 22” DEEP 12-05

CASEWORK & SPECIMEN SHELVING All measurements in inches/centimeters Last two digits of order number indicate cabinet width BASE CABINETS STANDING HEIGHT 35-1/4” HIGHNorth 22” DEEP X Aerojet Avenue 411

CASEWORK & SPECIMEN SHELVING All measurements in inches/centimeters Last two digits of order number indicate cabinet width Corner Angle Base Cabinets 22/55 (R.H.) Door Swing Only SC190-32 (L.H. Door Swing Only) SC191-32 Dead Corner Base Cabinets 22/55 22/55 22/55 411 North Aerojet Avenue Azusa, CA 91702 Tel (800) 410-0100 • (626) 334-1471 Fax (626) 334-1704 www.mortechmfg.com BASE CABINETS STANDING HEIGHT 35-1/4” HIGH X 22” DEEP 12-07

CASEWORK & SPECIMEN SHELVING • Open Front Unit • Swing Door Unit • Hinged Solid Doors • Swing Door Unit • Hinged Solid Doors All measurements in inches/centimeters Last two digits of order number indicate cabinet width • Swing Door Unit • Hinged Solid Doors • Sliding Door Unit • Flush Pulls • Solid Door Panels • Sliding Door Unit • Frameless Glass Doors • .25 in./1 cm. • Clear Glass • Swing Door Unit • Hinged Glass Doors • .25 in./1 cm. • Clear Glass • Swing Door Unit • Hinged Glass Doors • .25 in./1 cm. • Clear Glass • Swing Door Unit • Hinged Glass Doors • .25 in./1 cm. • Clear Glass • Sliding...

CASEWORK & SPECIMEN SHELVING All measurements in inches/centimeters Last two digits of order number indicate cabinet width Dead Corner Wall Cabinets - 14 in./35 cm. Deep All units are 32 in./81 cm. wide. 14/35 Dead Corner Solid Door • R.H. Door Swing SC282-32 SC283-32 SC284-32 SC285-32 Dead Corner Solid Door • L.H. Door Swing Dead Corner Glass Door • .25 in./1 cm. Clear Glass • R.H. Door Swing SC290-32 SC291-32 SC292-32 SC293-32 Dead Corner Glass Door • .25 in./1 cm. Clear Glass • L.H. Door Swing Corner Wall Cabinets - 14 in,/35 cm. Deep All units are 25 in./63 cm. wide. All measurements in inches/centimeters...

CASEWORK & SPECIMEN SHELVING • Open Front Unit • Swing Door Unit • Hinged Solid Doors All measurements in inches/centimeters Last two digits of order number indicate cabinet width • Swing Door Unit • Hinged Solid Doors • Swing Door Unit • Hinged Solid Doors • Sliding Door Unit • Flush Pulls • Solid Door Panels • Swing Door Unit • Hinged Glass Doors • .25 in./1 cm. • Clear Glass • Sliding Door Unit • Flush Pulls • .25 in./1 cm. • Clear Glass • Sliding Door Unit • Frameless Glass Doors • .25 in./1 cm. • Clear Glass • Swing Door Unit • Hinged Glass Doors • .25 in./1 cm. • Clear Glass • Swing Door...

CASEWORK & SPECIMEN SHELVING All measurements in inches/centimeters Last two digits of order number indicate cabinet width Dead Corner Wall Cabinets - 16 in./40 cm. Deep All units are 32 in./81 cm. wide. 16/40 Dead Corner Solid Door • R.H. Door Swing SC149-32 SC150-32 SC151-32 SC152-32 Dead Corner Solid Door • L.H. Door Swing Dead Corner Glass Door • .25 in./1 cm. Clear Glass • R.H. Door Swing Dead Corner Glass Door • .25 in./1 cm. Clear Glass • L.H. Door Swing Corner Wall Cabinets - 16 in./38 cm. Deep All units are 25 in./63 cm. wide. All measurements in inches/centimeters 16/40 Corner Angle...