Panel Specifications and Dimensions

Kenyon Chambers and Coldrooms are constructed using either ISO 8 panels, which are 80mm thick, or ISO 6 panels, which are 60mm thick. The provided diagrams and measurements are based on the ISO 8 panels. For chambers or coldrooms using ISO 6 panels, a deduction of 20mm should be applied to each panel measurement to account for the thinner panel thickness.

Panel Types and Model References

The document references multiple model codes such as KBC21SD, KBC2LD, KBC2iC, KBC2iD, KBC3iD, KBC6iDB, KBC99iD, KBC93SD, KBC6iD, KBC62SD, KBC6S3i, KBC3SD, KBC4iD, KBC4SD, and KBC42SD. These likely correspond to different chamber or coldroom configurations or sizes.

Dimensional Data

The numerical data scattered throughout the document appear to represent panel or chamber dimensions in millimeters, such as 650, 1060, 1960, 2200, 2860, 550, 1900, 2360, 2560, and 2440. These values likely correspond to height, width, or depth measurements of panels or assembled chambers.

Key Recommendations and Notes

• When using ISO 6 panels instead of ISO 8, reduce each panel measurement by 20mm to maintain accurate sizing.
• The document emphasizes the importance of selecting the correct panel thickness and corresponding dimensions for proper assembly.

Summary

This technical document provides essential specifications for Kenyon Chambers and Coldrooms, focusing on panel thickness options (ISO 8 and ISO 6) and their impact on dimensions. It includes model references and detailed measurements to guide correct assembly and sizing. The critical takeaway is the adjustment of dimensions when switching between panel thicknesses to ensure proper fit and performance.