DryXtreme - NA Heatless adsorption dryers Nominal air flow 0,12 - 1,06 m3/min. Purifying your compressed air, increasing your efficiency.

The efficient removal of impurities within compressed air offers numerous important benefits, reducing both downtimes and operating costs, and optimizing the entire process. Whilst MTA filtration allows the removal of dirt and oil, condensate removal requires the use of a dryer. DryXtreme adsorption dryers offer pressure dew points down to -40 °C or even -70 °C, allowing numerous critical applications to function accurately and efficiently. And all this within an advanced yet easy to use package. Guaranteed performance Advanced control DryXtreme is CE marked and PED approved, as well as being...

DryXtreme - the perfect partner for your application DryXtreme Applications – Packaging, bottling, power stations, paint spraying, dentistry, laboratories, instrumentation & measurement equipment, conveyors, CNC machines, pharmaceutical, automotive, lasers, sprinkler systems, other general industrial applications. Reduced purge losses – Generous dryer sizing reduces purge losses, with an interchangeable purge plug allowing personalization to the exact operating conditions, avoiding unneeded energy wastages. Reduced filter drain losses – An integral electronic drain allows the pre-filter to be...

Recommended pre-filter (*) Data refers to the following working conditions: air FAD 20 °C / 1barA, pressure 7 bar(g) at dryer inlet, air inlet temperature 35 °C, pressure dew point -40 °C, according to ISO 8573.1 standards. Dryer working limits: working pressure 4-16bar(g); inlet temperature 1,5-50 °C; ambient temperature min. 5 °C. Power supply: 100-240V AC 50-60Hz; 12-24V DC. Adequate pre-filtration (MTA grade S, ideally preceded by grade P or M) should always be installed upstream of the dryer; according to the application, additional dust filtration (MTA grade M or S) may need to be installed...