Bed lamp Lumos The case of the bed lamp Lumos consists of extruded, anodized or powder-coated aluminum. Standard surfaces are naturally anodized and powder-coated RAL 9016 (traffic white). Optional there are different colours possible. The side caps are made out of stainless steel. Per surchage the side caps can be made out of aluminium with rounded edges in luminaire colours. The efficient LED-Modules have a standard light temperature of 4000K. Other colour temperatures and variable colour temperatures are possible. The bed lamp is by default 1200m long. For a continuous light profile for one or more beds a length of 6000mm can be delivered unseparated. The lamp shines with an angle of 50 degrees downwards and has a satin-finished PMMA cap. For optimal room lighting the indirect LEDs are shining with an angle of 30 degrees to the horizontal. The indirect lights are covered with clear PMMA glass. Direct and indirect lighting are dimmable via DALI interface. The bottom side accessory slot can hold transfusion bottles or stand tubes. We can also create customer specific mounts offered as a purpose-built item. With the flat surface the Lumos is easy to clean and saves time. Do you have special conceptions: Contact us ! Medizinisch-Technische Gerätebau GmbH Zur Seilscheibe 8-10  e-mail: [email protected] Subject to technical changes No liability

Technical Data Profile depth Profile heigh Standard length for single lamps Max. unseperated delieverable profile length Direct lighting approx. 2400 lm dimmable(DALI) coverage PMMA satinated Indirect lightinge approx. 4800 lm dimmable (DALI) coverage PMMA transparent Recommended mounting height Lumos Standard Colour: traffic white RAL 9016 Side caps: Stainless steel Direct lighting / Reading lighting: approx. 2400 lm Indirect lighting/room lighting: approx. 4800 lm Light temperature 4000K Length: 1200mm (plus side-cap) Height: 70mm Depth: 150mm Lumos Standard Colour: Aluminium naturarally anodized...