E700L MAX, E500L MAX of instructions
22Pages

USER MANUAL MAX-LED -- SURGICAL LAMP E700L, E500L Nanchang Micare Medical Equipment Co.,Ltd No.666 Yaohu West 5th Road, Hi-Tech Zone, Nanchang, Jiangxi, China Contact Person: Ria Xu Email: sales4@nclaite.com

CONTENT Cover -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ---------- -- -- ---------- 1 Main technical indicators and reference data ----------------------------2 Install and use ----------------------------------------------------------------3 Maintenance and repair -----------------------------------------------------4 Solutions to frequently asked questions -----------------------------------5 Storage and transportation --------------------------------------------------6 Normal operating environment --------------------------------------------7 Safe life...

Nanchang Micare Medical Equipment Co.,Ltd . continuously strives to improve its products and therefore reserves the right to deliver product structures with features different from those described in this Manual without prior notice;However, Nanchang Micare Medical Equipment Co.,Ltd . warrants that these improvements comply with valid regulations and reserves all rights. 【 Abstract 】 You have just bought LED Surgical Lamps.We congratulate you on your choice and trust that you will be satisfied with its usage and performance. We recommend that you read this manual carefully before using the...

questions you may have when using the lamp for the first time. If the power characteristics do not meet the requirements, the operating lamp will not exert its maximum efficiency, and will not ensure normal operation. The transportation risk of the equipment shall be borne by the consignee. Any dispute over loss or damage during transit must be declared in the presence of the carrier at the time of delivery and explained on the waybill. In no event shall packaging materials manufactured by the company be used for any purpose other than transportation. The instructions in this manual fully...

Warning: Appearing before certain operations, if these rules are violated, may damage the equipment and endanger personal safety. [Product appearance] Technical parameters Light Intensity at 1M (Lux) Color temperature (K) Spot diameter (mm) Color rendering index Temperature rise of surgeon's head (℃) Temperature rise in surgical field (℃) R9 Rendering Index Lighting depth (mm), L1+L2 At 60% The power supply voltage Input power (W) LED Quantity Lamp Diameter (MM) Radiant Energy Life Span Internal Camera Optional

【 Main technical indicators and reference data 】 Electrical diagram of LED Surgical Lamp is shown 2、Installation and use This product must be installed by the manufacturer's engineer. Note: 1, the installation process should be connected to the electrical line (the power cable is connected to AC220V or 110V) and tighten the fasteners of each connection part (important); 2. During the installation process, the levelness of the hanger must be strictly calibrated with a level (very important). 3. Before shadowless lamp is installed, the customer shall provide a 250V/10A switch/circuit breaker...

a) When there is a structural beam in the center of the ceiling of the operating room, a hanger can be installed on the structural beam, and the height of the hanger depends on the height of the ceiling of the operating room. (As shown in the attached schematic diagram of hanger installation in Figure 1) B) When there is no structural beam in the center of the operating room, a hanger can be installed on the roof, and the height of the hanger depends on the ceiling height of the operating room.When the floor is not penetrated, six expansion bolts can be used to secure the hanger.(Note: The...

After assembling the lamp holder, align the flange on the bracket with the flange of the lamp holder, and connect the 4 holes firmly with 4 sets of M12×70 bolts (with 4 12 flat washers, 4 12 spring washers and 4 M12 nuts).Switching power supply wiring must recognize the color of each wire, and the corresponding color connection.The red wire connects to the L terminal of the power box, the blue ring N terminal, and the output red wire of the power box connect to V+, and the blue wire connects to V-. (As shown in the installation diagram of power supply box in Attached Figure 4) Shadowless...

2.3 Use of surgical lamp After the shadowless lamp is installed, electrification acceptance shall be carried out. 2.3.1 Scope of activities The bracket can rotate 360° back and forth around the lamp holder, the spring arm and straight tube can rotate 540° back and forth around the bracket, the spring arm can swing up and down 60°, and the lamp cap can rotate 540° around the ya tube joint.Each movement should be operated on the handle of the control box or lamp holder body. 2.3.2 Illumination adjustment 2.3.2.1 description The shadowless lamp control display terminal is equipped with a...

supports quick switching adjustment of one key cavity mirror. 2.3.2.3 Lamp holder 1 control interface Cavity mirror adjustment Interface switch TAB The lights switch Light regulation Synchronous control switch Brightness control Shadowless Color temperature adjustment Figure 1 After the shadowless lamp control terminal is powered on, the lamp cap 1 control interface (FIG. 1) will enter by default, which can adjust the switch, brightness, color temperature, light spot, cavity mirror position of the parent lamp cap, color lamp switch and synchronous control switch of child and parent lamp...

2.3.2.5 Lamp Switch By clicking the button can turn on/off the lights, the control board will remember the lights on and off state. The key state State that Lamp closed, shadowless lamp open state operation. Lamp open, shadowless lamp open state operation. 2.3.2.6 Shadowless lamp switch Click the button to turn on or off the Shadowless lamp, and the control board remembers the shadowless lamp switch status. The next power-on will maintain the switch status before the last power off. The key state State that Shadowless lamp open, at this time can operate lights, synchronous control switch...