1. Catalogs
  2. Nanion Technologies
  3. Internal Perfusion

Internal Perfusion

Internal Perfusion

Internal Perfusion

Product catalog summary
Internal Perfusion System Overview
The Internal Perfusion System for the Port-a-Patch® allows for robust and reliable internal solution exchange, enabling complete exchange of solutions within seconds. This system supports continuous internal perfusion and allows data recordings during solution exchange.

Functionality and Applications
Nanion's planar patch clamp chips enable perfusion of the intracellular side of the membrane, allowing for dose-response analysis of compounds affecting the cytosolic portion of ion channels. The system can perfuse up to eight different solutions inside the cell, facilitating the study of second messengers and metabolites on ion channel function. The system can be operated manually or fully computer-controlled, synchronizing data acquisition with solution exchange.

Experimental Results
1. Stable Recordings: KV1.3 currents in Jurkat cells were blocked by Cs+ and recovered with K+, demonstrating stable recordings over 35 minutes.
2. Second Messengers: BK channel currents in CHO cells were studied with internal Ca2+ solutions, showing changes in current amplitude.
3. TRPV1 Modulation: TRPV1 currents were partially blocked by internal Ca2+-calmodulin after capsaicin activation.
4. Rapid Exchange: Internal solution switching during gramicidin recordings was achieved within seconds, affecting channel conductance.

Pharmacological Experiments
KV1.3 currents were blocked by quinidine and TEA+, with IC50 values determined for both compounds, aligning with literature values.

Product Specifications
1. Internal Perfusion with Perfusion System: Includes a valve control panel, internal perfusion chamber, and starter kits. Dimensions: 40 x 5.8 x 13 cm, Weight: 2.45 kg.
2. Internal Perfusion without Perfusion System: Includes an internal perfusion chamber and starter kit. Dimensions: 7.0 x 7.0 x 10 cm, Weight: 460 g.
See more

Catalog excerpts

Internal Perfusion-1

Port-a-Patch® - Reaching inside the cell. Robust and reliable internal solution exchange • Complete exchange of solutions in seconds • Continuous internal perfusion possible • Data recordings possible during solution exchange

 Open the catalog to page 1
Internal Perfusion-2

Nanion's planar patch clamp chips offer the unique possibility to perfuse the intracellular side of the membrane. This aspect is exploited with the Internal Perfusion System for the Port-a-Patch®. Up to eight different solutions can be perfused inside the cell, allowing dose response analysis of compounds acting on the cytosolic portion of the ion channel. Second messengers and metabolites can also be added internally to investigate how ion channel function is affected. Solutions are exchanged within seconds, and the ion channel modulation can be continuously monitored during the solution exchange....

 Open the catalog to page 2
Internal Perfusion-3

Stable recordings during internal ­ erfusion. p KV1.3 currents (blue), ­ ndogenously exe pressed in Jurkat cells, were rapidly ­ locked b by internal perfusion of Cs+ (light blue), and fully recovered after washout with K+ (grey). Internal solution replacement was ­epeated r 19 times and the recording was stable for over 35 minutes, as shown in the lower Internal application of second messengers. Currents mediated by BK channels expressed 2 nA in CHO cells were studied using the Internal Perfusion System. Currents were elicited by a voltage step from -80 mV to +80 mV before and c ­ ontaining...

 Open the catalog to page 3
Internal Perfusion-4

Pharmacological experiments. KV1.3 current was blocked by the internal application of increasing concentrations of quinidine (left) or TEA+ (right). The graphs show the Hill plots for IC50 determination. For quinidine the IC50 was determined as 15 |jM (literature value external application 14 jM) and for TEA+ the IC50 was determined as 0.9 ± 0.3 mM (n = 3) (literature value internal application 0.6 mM). Internal perfusion Size (l x w x h): 7.0 x 7.0 x 10 cm Weight: 460 g Internal Perfusion without Perfusion System* • Internal Perfusion Chamber with housing • Internal Perfusion starter kit: electrodes,...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.