Port-a-Patch Accessories and Add-ons
9Pages

Port-a-Patch Accessories and Add-ons For quotations and orders email:

External Perfusion/Temperature Control The External Perfusion System for the Port-a-Patch is comprised of a computer controlled magnetic pinch valve panel and a dedicated flow chamber. Up to eight different solutions can be handled by the perfusion panel. Solutions can either be switched manually or via the software. The latter allows synchronization of data acquisition with solution exchange, as well as tagging of the collected traces with relevant information such as compound and concentration applied. Temperature Control is also available in combination with the External Perfusion System...

Internal Perfusion Nanion's planar patch clamp chips offer the unique possibility to perfuse the intracellular side of the membrane. This aspect is exploited with the Internal Perfusion System for the Port-a-Patch. Up to eight different solutions can be perfused inside the cell, allowing dose response analysis of compounds acting on the cytosolic portion of the ion channel. Second messengers and metabolites can also be added internally to investigate how ion channel function is affected. Solutions are exchanged within seconds, and the ion channel modulation can be continuously monitored...

Low Capacitance holder The Low Capacitance Holder for the Port-a-Patch has been developed to reduce the capacitance of the recording system, thereby increasing the temporal resolution and the signal-to-noise ratio. This reduction in capacitance is critical for experiments requiring increased resolution, e.g. recordings of small conductance ion channels with fast gating properties in a planar lipid bilayer or in the cell attached mode. The capacitance of the whole system including a bilayer on the chip is approximatey 2.5 pF, compared to 6.5 pF for the standard Port-a-Patch. This corresponds...

Microscope slide kit Nanion offers the Port-a-Patch Microscope Slide developed for the simultaneous visualization and patch clamp recording of the cell. Fluorescence measurements using an upright microscope can therefore be combined with current recordings. Order Number Product Details 01 1010 Port-a-Patch Microscope Slide - 3 Port-a-Patch Microscope Slides Kit - 1 Electrode set, adaptors and cabling 01 1011 Port-a-Patch Microscope Slide 1 Port-a-Patch Microscope Slide

05 1004 Vesicle Prep Pro Formation

Standard chips for bilayer and patch clamp recordings. Minimum order 100 pieces. Order Number NPC®-1 patch clamp chips 1-2 MOhm NPC®-1 patch clamp chips 2-3.5 MOhm NPC®-1 patch clamp chips 3-5 MOhm NPC®-1 patch clamp chips 5-10 MOhm NPC®-1 patch clamp chips 8-12 MOhm NPC®-1 patch clamp chips 10-15 MOhm