Life/form® Bariatric CPR Manikin Life/form® Bariatric CPR Manikin The first and only CPR manikin to offer the realistic size and appearance of an older, heavier cardiac victim — the kind rescue personnel are most likely to encounter in the field! The first and only CPR manikin to offer the realistic size and appearance of an older, heavier cardiac victim — the kind rescue personnel are most likely to encounter in the field! Accurate anatomical landmarks and ease of use will make the Bariatric CPR Manikin a valuable addition to your training program. Sanitary features include individual face inserts, disposable airway system, and a non-rebreathing valve. For added convenience and economy, all internal parts (including the airway system) are fully compatible with the Simulaids Brad™ CPR Manikin. Accurate anatomical landmarks and ease of use will make the Bariatric CPR Manikin a valuable addition to your training program. Sanitary features include individual face inserts, disposable airway system, and a non-rebreathing valve. For added convenience and economy, all internal parts (including the airway system) are fully compatible with the Simulaids Brad™ CPR Manikin. One Assembled Manikin Two Additional Face Inserts (LF03752U, White)(LF03748U, Black) Two Additional Lung/Airway Systems (LF03751U) *Two Additional Connectors *Two Additional Exhaust Manifold Caps *Carry Bag Product Instruction Card 3-Year Warranty Card *Note: Components listed without numbers may be available for special order. Additional parts, supplies, products, and information are located at the end of this manual. General Instructions for Use Removing the Airway Face Insert Connector One Assembled Manikin Two Additional Face Inserts (LF03752U, White)(LF03748U, Black) Two Additional Lung/Airway Systems (LF03751U) *Two Additional Connectors *Two Additional Exhaust Manifold Caps *Carry Bag Product Instruction Card 3-Year Warranty Card *Note: Components listed without numbers may be available for special order. Additional parts, supplies, products, and information are located at the end of this manual. General Instructions for Use Removing the Airway 1. Remove the face insert and connector from the face cavity. (See figure 1.) 2. With the manikin face up, pull the overlay skin from the shoulders and fold down. 3. Lift off the sternum plate, foam sternum insert, and foam insert to expose the lung/airway system. 3. Lift off the sternum plate, foam sternum insert, and foam insert to expose the lung/airway system. 4. Tilt the head back to expose the airway valve and manifold cap. (See figure 2.) 1. Remove the face insert and connector from the face cavity. (See figure 1.) 2. With the manikin face up, pull the overlay skin from the shoulders and fold down. Face Insert 4. Tilt the head back to expose the airway valve and manifold cap. (See figure 2.) 5. Pull out the airway valve from underneath the chin. 6. Remove and discard the lung/airway system and airway valve. 5. Pull out the airway valve from underneath the chin. 6. Remove and discard the lung/airway system and airway valve.

1. Locate a new lung/airway system. 1. Locate a new lung/airway system. 2. Press the red exhaust manifold cap onto the open port of the airway valve. 2. Press the red exhaust manifold cap onto the open port of the airway valve. 3. Tilt the head back and insert the airway valve stem through the hole in the face from underneath. Note: Ensure the red exhaust manifold cap is positioned toward the top and the airway valve is below it. (See figure 2.) 3. Tilt the head back and insert the airway valve stem through the hole in the face from underneath. Note: Ensure the red exhaust manifold cap is positioned...