IT-III Active
20Pages

Find Neobiotech online

WHY IT-III active? IT-Ⅲ active, an internal non-submerged type and tissue level implant product, simplifies implantation depth control. S.L.A. surface of IT-Ⅲ active minimizes osseointegration period and its smooth body design maximizes initial stability for prosthetic loading, or AnyTime Loading.

3.1 Octa 8˚ Morse Taper —— Compatible with previous IT System —— Regular Neck / Wide Neck 1.8 / 2.8 G.Collar —— Applicable to various oral conditions with dual Gingiva Collar type Straight Neck —— Easy to control implantation depth —— Reduce the risk of fracture S.L.A. Surface —— More S.L.A. surface site than previous version Deep & Wide Pitch —— Increased bone-implant contact —— Increased osseointegration conditions Wide Cutting Edge —— Increased sense of implanta

IT-III active Features 1 Dual Gingiva Collar Type Applicable to various gingival height with dual gingiva collar type, 1.8mm and 2.8mm Reduced osseoingtegration period with improved S.L.A. surface process technology before Improved S.L.A. Surface Process Technology 40% increased surface site Reduced osseointegration period (50% increased cell adhesion)

Deep & Wide Pitch Increased stability and osseointegration rate with enlarged contact area between thread pitch and bone Minimal bone compression (Prevent bone necrosis) Optimized condition for osseointegration Wide Cutting Edge Improved stability and sense of implantation with doubled cutting edge Total Stability Change Stability Dip Primary Stability (Old Bone) Secondary Stability (New Bone) 1 2 4 AnyTime(Immediate) Loading Doubled cutting edge surface Improved self-tapping ability with minimized bone compression Maximized initial stability (AnyTime Loading)

IT-III active Features 5 Improved neck design to ease implantation depth control, without being blocked by cortical bone

Prevent the risk of fracture with improved solidity of neck (Over 30% thickened neck) A Diameter

IT-III active Line Up Regular Neck Diameter Platform

Wide Neck Diameter Platform * Cover screw not inclu

IT-III active Line Up Cover Screw Regular Neck Small Product name Product name Product name Product name Healing Abutment Regular Neck Diameter Cuff Product name Wide Neck Product name Diameter Cuff

IT-III active Prosthetic Connection Regular Neck 8˚ Internal morse taper —— 8˚ Morse Taper —— 3.1 Octagon

IT-III active Prosthetic Connection Respecting the biological distance Smooth machined collar provides biological width to minimize bone resorption, and space for gingiva to develop Biomechanical implant design The tulip-shaped body and 45 degree shoulder design prevent bone micro-damage and bone resorption by a proper distribution weight loads Optimal positioning of smooth and rough surface The smooth collar provides flexibility on maintenance and adjustment of bone level and its height

IT SCRP® Abutment Cementable or Screw-retained abutment for single tooth and bridges —— Customizable by grinding (need to remain at least 3mm of abutment length above fixture platform) —— Abutment Screw (ITCS20S) included, Tightening Torque : 30Ncm —— Short octa design, Retrievable within 16° between implants Regular Neck Cuff(mm) Wide Neck Cuff(mm)

IT SCRP® Abutment —— IT System, internal non-submerged type implant, simplifies implantation depth control with its long neck. Abutment is connected on the fixture at top of the bone level, thus IT system eases removal of the abutment and residual cement. —— Semi-octa structure of SCRP Abutment simplifies both installation and removal of prosthetic within 16 degrees in multiple cases. 16˚

1. Dual collar heights 2. Splinting with different fixture type Prosthetic, bridge type, with different cuff sizes of IT SCRP abutment with different bone level Prosthetic with SCRP abutment, bridge type, upon various types of fixtures, on different slopes of bone level

IT-III active Drilling Protocol IT-III active Fixture Ø3.5 X 10mm (D1/D2 bone) Point Lindemann Ø 2.3 In soft(D4) bone, use Ø 2.2 initial drill as the final drill IT-III active Fixture Ø4.0 X 10mm (D1/D2 bone) Point Lindemann Ø 2.3 In soft(D4) bone or in condition of getting initial fixation at implant apex, Ø3.0 twist drill is the f

Drilling Speed & Torque Point Lindemann, Initial Drill, Twist Drill : 1,200rpm / 35~45Ncm Cortical Tap : 50rpm / 50Ncm Cortical Drill : 1200rpm / 50Ncm (Conventional Loading case) IT-III active Fixture Ø4.5 X 10mm (D1/D2 bone) Point Lindemann Ø 2.3 In soft(D4) bone or in condition of getting initial fixation at implant apex, Ø3.5 twist drill is the final drill IT-III active Fixture Ø5.0 X 10mm (D1/D2 bone) Point Lindemann Ø 2.3 In soft(D4) bone or in condition of getting initial fixation at implant apex, Ø4.0 twist drill is t

IT-III active EZ Fixing Spacer Ridge Wider Kit T-brush IS-III active EZ GBR System Encoded Healing abutment CAMeleon cs World Class 300 Manufactured CAMeleon EB-II active SinusAll Kit PickCap Impression Kit IT-II active Prosthetic Kit / Accessory Kit Neoguide system GBR Kit IS-II active, Quicktight IS-II, S-mini & ACM CTi – mem SR Kit FR Kit Wide Implant CMI IS implant SLA-Kit SCA-Kit Obtain the patent of CMI Implant Merged with “Osscare.Co.Ltd” CMI implant(External Type) Change of Management Foundation of “Neobiotech.Co,L

Neobiotech Co.,Ltd Tel 82-2-582-2885, Fax 82-2-582-2883 www.neobiotech.com / Made in Korea