Neo Master Kit

Product catalog summary

Components Overview
The document lists various components used in surgical procedures, including surgical drills, MD spacers, drill stoppers, guide point drills, hex drivers, cortical taps, fixture drivers, ratchet connectors, torque ratchets, Lindemann drills, direction pins, and MD parallel pins. Each component is specified with its diameter and model number.

Neo Master Kit Features
The Neo Master Kit is compatible with IS-II active, IS-III active, and IT-III active fixtures. It includes surgical drills and fixture drivers for implantation. For fixtures with a diameter of 5.5mm or more, an S-Wide kit is required. The kit also features additional drill stopper slots for frequently used sizes, which can be purchased separately.

Implantation Interval Inspection
The MD Parallel Pin is used to measure intervals between implants, with a range from Ø4.0 to Ø9.0. This helps in determining the mesiodistal size of the crown.

Drilling Protocol
The document outlines the drilling protocol for IS-III active and IT-III active fixtures with diameters ranging from Ø3.5 to Ø5.0 and a length of 10mm. It specifies the sequence of drills and cortical taps to be used, along with their respective diameters.

Drilling Speed & Torque
The recommended drilling speed for the Guide Point Drill, Initial Drill, and Twist Drill is 1,200rpm with a torque of 35~45Ncm. The Cortical Tap should be used at 50rpm with a torque of 50Ncm.

Catalog excerpts

Find Neobiotech online

Open the catalog to page 1

Components Cortical Tap & Fixture Driver are selectable with fixture type. Cortical Tap For IT-III active / IS-III active Drill Stopper Guide Point Drill Ø1.35

Open the catalog to page 2

Cortical Tap (IS-II active) ❖ Cortical Tap (IT-III / IS-III active) ❖ Torque Ratchet Ratchet Connector Driver Holder & Depth Gauge S-narrow Drill Stopper ❖ S-narrow Surgical Drill ❖ S-narrow Fixture Driver ❖ ISFDSNCL

Open the catalog to page 3

01 Compatible with IS-II active, IS-III active, IT-III active Surgical drills and fixture drivers for fixture implantation are included. —— Applicable fixture types: IS-Ⅱ active / IS-Ⅲ active / IS-Ⅲ active S-Narrow / IT-Ⅲ active —— For fixtures with Ø5.5 and more, S-Wide kit is required. 02 Additional Drill Stopper Slots for frequently used drill stoppers are doubled; —— Additional drill stoppers are separately purchasable. —— 5 slots are available for: 7.3, 8.5, 10.0, 11.5, 13.0mm —— Additional stoppers may be pre-installed on the following drill to reduce surgery time and increase convenience....

Open the catalog to page 4

Drilling Protocol IS-III active (IT-III active) Fixture Ø3.5 X 10mm (D1/D2 bone) Guide Point Drill Ø 1.35 IS-Ⅱ cortical tap (black) is applied for IS-Ⅱ active fixtures. IS-III active (IT-III active) Fixture Ø4.0 X 10mm (D1/D2 bone) Guide Point Drill Ø 1.35 IS-Ⅱ cortical tap (black) is applied for IS-Ⅱ active fixtures.

Open the catalog to page 5

Drilling Speed & Torque Guide Point Drill, Initial Drill, Twist Drill : 1,200rpm / 35~45Ncm Cortical Tap : 50rpm / 50Ncm IS-III active (IT-III active) Fixture Ø4.5 X 10mm (D1/D2 bone) Guide Point Drill Ø 1.35 IS-Ⅱ cortical tap (black) is applied for IS-Ⅱ active fixtures. IS-III active (IT-III active) Fixture Ø5.0 X 10mm (D1/D2 bone) Guide Point Drill Ø 1.35 IS-Ⅱ cortical tap (black) is applied for IS-Ⅱ active fixtures.

Open the catalog to page 6

All Neobiotech catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list