1. Catalogs
  2. NeuroEnterprises
  3. Low Profile Cervical Curette

Low Profile Cervical Curette

Low Profile Cervical Curette

Product catalog summary
Overview
The Low Profile Cervical Curette is a surgical instrument designed for treating cervical spinal stenosis caused by herniated discs, ligament overgrowth, or osteophytes. It is particularly useful in procedures like total disc replacement (TDR) and anterior cervical discectomy and fusion (ACDF), and occasionally in posterior cervical foraminotomies.

Specifications
  • Sizes: 4mm x 3mm and 3mm x 2mm (Slim)
  • Models: #NE501 (Set of 2 instruments), #NE502 (Serrated Edge), #NE503 (Smooth Edge), #NE506 (Serrated Edge – Slim), #NE508 (Smooth Edge – Slim)
  • Made in USA
  • Patent information available at www.neuroenterprises.com/patent

Design Features
  • The low profile tip allows safe passage anterior to the thecal sac, minimizing spinal cord compression risks.
  • The tip angle is optimized for passing behind the vertebral body without leveraging on the thecal sac.
  • The tip length enables access to areas previously requiring partial corpectomy.
  • The cutting surface effectively decompresses sequestered discs, hypertrophied PLL, or osteophytes.

Instructions for Use
The instrument is passed under or over the PLL to decompress the central canal behind the superior and inferior posterior endplates. The procedure is repeated as necessary.

Sterilization Guidelines
For gravity-displacement steam autoclave sterilization: 121°C (250°F) for 30 minutes with a 30-minute drying time, or follow institutional protocols for stainless steel instruments.

Ordering Information
To place an order, call 312.859.6889, fax 866.231.5454, or email [email protected].
See more

Catalog excerpts

Low Profile Cervical Curette-1

Low Profile Cervical Curette Low profile cervical curette is a surgical instrument designed for patients that present with cervical spinal stenosis from herniated disc, ligament overgrowth or osteophytes causing spinal cord compression. The low profile cervical curette provides a simpler and more effective decompression of the posterior aspect of the cervical vertebral body (VB) when performing total disc replacement (TDR) and anterior cervical discectomy and fusion (ACDF). It may also be used less frequently in cases of posterior cervical foraminotomies. DESIGN • The low profile tip allows it to be passed anterior to the thecal sac without concerns of spinal cord compression compared to commonly used up-angle curettes. • The angle of the tip is optimized to allow passing the curette behind the vertebral body without levering the instrument on the thecal sac. • The optimized length of the tip allows surgeons to reach areas previously inaccessible unless a partial corpectomy was performed up to as much as ¼ height of the VB. • The cutting surface is designed to effectively decompress any sequestered disc, hypertrophied posterior longitudinal ligament (PLL) or osteophytes behind the VB. The surgeon passes the instrument underneath or over the PLL to decompress the central canal behind the superior and inferior posterior endplates. The procedure is repeated as many times as the surgeon deems appropriate. • Sizes: 4mm x 3mm and 3mm x 2mm – Slim • #NE501 - Set includes any 2 instruments below • #NE502 - Serrated Edge • #NE503 - Smooth Edge STERILIZATION GUIDELINE RECOMMENDATION • #NE506 - Serrated Edge – Slim For gravity-displacement steam autoclave sterilization: 121 Centigrade (250 F) for 30 minutes with a 30 minutes drying time or follow the institution’s protocol for stainless steel instruments. • #NE508 - Smooth Edge – Slim • Made in USA • • “Patent” www.neuroenterprises.com/patent ACF Cervical Curette (Serrated) ACF Cervical Curette (Smooth) TO PLACE AN ORDER CALL: 312.859.6889, FAX: 866.231.5454 OR EMAIL: [email protected] Manufactured for NEUROENTERPRISES 2250 N. Lakeview Ave., #S-301, Chicago, IL 60614

 Open the catalog to page 1

All NeuroEnterprises catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.