NE-1000 Single Syringe Pump - $750 High Pressure Syringe Pump NE-1010: $830 Continuous Infusion Syringe Pump System Dual-NE-1000: $1510 Microfluidics Single Syringe Pump NE-1002X: $1500 NE-1000 Features: Accepts 1 syringe from the smallest size available up to 60 mL. A 140 mL syringe can be filled up to 120 mL. NE-1000 & Dual-NE-1000 pumping rate as low as 0.73 µL/hr with a 1 mL syringe or as high as 35.33 mL/min with a 60 mL syringe. NE-1010 pumping rate as low as 1.459 µL/hr with a 1 mL syringe or as high as 127.2 mL/min with a 60 mL syringe. NE1002X pumping rate as low as .008 nL/hr with a 0.5 µL syringe or as high as 1555 µL/min with a 60 mL syringe. The NE-1000 Family of Syringe Pumps Features Built for Automation Operates stand-alone or from a computer Infuses and withdraws Applications range from simple infusions to complex pumping programs Programmable preset protocols Program up to 41 pumping phases: change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer. RS-232 and TTL logic control interfaces Two pumps connected with a dual cable create a Dual Pump System allowing for continuous infusion or emulsification. Network, control, and monitor up to 100 pumps with one computer. Worldwide power supplies available. Motor stall detection. Non-volatile memory of all parameters and programming. Upgradeable to the X and X2 advanced firmware versions for gradient pumping and increased program memory. Dispensing accuracy of +/-1%. Unlimited lifetime technical support. Two year warranty. Plus many, many more features!

Clever Pumps, Priced Right!

Specifications Mechanical & Electrical Syringe sizes: Number of syringes: Motor type: Motor steps per revolution: Microstepping: Advance per step: Motor to drive screw ratio: Drive screw pitch: DC connector: Voltage at DC connector: Amperage: Power supply type: Power supply output rating: Dimensions: Weight: Allen Wrench Up to 60 mL (140 mL partially filled) 1 Step motor 400 1/8 to 1/2 depending on motor speed 0.2126 uM to 0.8504 uM depending on motor speed 15/28 20 revolutions/” 2.1 mm, center positive 12V DC at full load 750 mA at full load Unregulated linear external wall adapter, country...