*mymedicalexpo

NE-300

Product catalog summary

Overview
The document provides detailed information about precision syringe pumps, specifically the NE-300 Just Infusion™ Syringe Pump, along with related accessories and specifications. It highlights the features, specifications, and operational parameters of the syringe pumps offered by SyringePump.com.

Features

Compatible with syringes up to 60 mL.
Continuous pumping until manually stopped.
Adjustable infusion rates during operation.
Memory retention of previous settings after power-up.
Syringe purge and power failure modes.
Displays total volume dispensed in mL or µL.
Precise and reproducible flow rates with selectable infusion rates in mL/hr, µL/hr, mL/min, and µL/min.
Infusion rates range from 0.73 µL/hr (1 mL syringe) to 1,500 mL/hr (60 mL syringe).

Specifications

Mechanical & Electrical: Supports syringe sizes up to 60 mL, partially filled 140 mL, with a single syringe capacity.
Motor: Step motor with 400 steps per revolution and micro-stepping capability.
Drive: Motor to drive screw ratio of 15/28 with a drive screw pitch of 20 revolutions/inch.
Power: 12V DC connector with 750 mA at full load, using a regulated external wall adapter.
Dimensions: 8 3/4” x 5 3/4” x 4 1/2” (22.86 cm x 14.605 cm x 11.43 cm).
Weight: 3.6 lbs. (1.63 kg).

Operational Parameters

Maximum speed: 3.7742 cm/min.
Minimum speed: 0.004205 cm/hr.
Maximum pumping rate: 1,257 mL/hr with a B-D 60 mL syringe.
Minimum pumping rate: 0.73 µL/hr with a B-D 1 mL syringe.
Maximum force: 35 lbs. at minimum speed, 18 lbs. at maximum speed.
Syringe inside diameter range: 0.100 to 50.00 mm.

Additional Information
For more details, visit SyringePump.com or contact New Era Pump Systems Inc. at the provided contact information.

Catalog excerpts

Precision Syringe Pumps Peristaltic Pumps Syringe Heaters Accessories NE-300 Just Infusion™ Syringe Pump Infuses Only! Just the features you want and none that you don’t want to pay for! No withdrawal, volume target, computer interface or programmability Features · · · · · · · · · · Holds large or small syringes up to 60 mL Pumps continuously until you stop the pump Change infusion rate while pumping Remembers previous settings on power up Syringe purge mode Power failure mode – continue pumping after reset Displays total volume dispensed in mL or µL Precise, reproducible flow rates Selectable infusion rates: mL/hr, µL/hr, mL/min, µL/min Infusion Rates: 0.73 µL/hr (1 mL syringe) to 1,500 mL/hr (60 mL syringe) 1. Set the syringe diameter 2. Set the infusion rate 3. Start the pump

Open the catalog to page 1

Syringe Manufacturer (all names™) Maximum Rate (mL/hr) Minimum Rate (µL/hr) Maximum Rate (mL/min) Maximum Rate (µL/hr) Minimum Rate (µL/hr) Maximum Rate (mL/hr) Minimum Rate (µL/hr) www.SYRINGEPUMP.com [email protected]

Open the catalog to page 2

Specifications Mechanical & Electrical Syringe sizes: Motor type: Step motor Motor steps per revolution: 1/8 to 1/2 depending on motor speed 0.2126 µm to 0.8504 µm depending on motor speed Motor to drive screw ratio: Drive screw pitch: Power supply type: Regulated external wall adapter, country and power source specific Power supply output rating: Dimensions: Weight: Operational Maximum speed: Minimum speed: Maximum pumping rate: Minimum pumping rate: Maximum force: Syringe inside diameter range: 3.7742 cm/min 0.004205 cm/hr 1,257 mL/hr with a B-D 60 mL syringe 0.73 µL/hr with a B-D 1 mL syringe...

Open the catalog to page 3

NE-300

NE-300

Catalog excerpts

All New Era Pump Systems catalogs and technical brochures