STARCLEAN 12-14 SURFACE CLEANROOM SERIES SURFACE LUMINAIRE FLUORESCENT/LED PROJECT: TYPE: PRODUCT: APPROVED: DATE: DIMENSIONAL DATA FEATURES The New Star “StarClean S12-S14” Cleanroom fixture is designed for use in medical settings, labs, high-tech production facilities, food processing and areas where clean is critical. • Surface housing utilizing enclosed design with seam welds to insure ingress protection • Standard overlapping frame contruction from a single sheet with beveled edges • Inset frame fabrication from extruded aluminum with sealed, reinforced edges Dimming Driver (0-10V) standard Dimming 1% available Smooth surfaces for easy cleaning Specialized gasketing to provide contamination control REMOVABLE COVER; GASKETED TO HOUSING WITH (2) 7/8” DIA. K.O.’S OVERLAPPING FRAME • Cleanroom • Laboratory • Hospital • Food Processing Facilities • Hi- Technology Manufacturing SPECIFICATION FEATURES HOUSING: Acrylic lens with optional RFI and symmetric/ asymmetric pattern, smooth side out. Overlapping frame uses a rail hold down system . Housing Matl HC = 20Ga. CRS (Standard) HS = 20Ga. S.S. HP = 20Ga. S.S (Painted) HA = Alum. (Painted) Fluorescent: LED: 1 = Ballast 1 = Driver 2 = Ballast 2 = Driver 3 = Driver 4 = Driver White Antimicrobial powdercoat finish following iron phosphate pre-treatment. Overlap Frame Inset Frame Options: Options IP65: IE=Extruded Alum.No IP65 OC=18Ga. CRS(Stand.) IP=Extruded Alum.(Paint.) OS=18Ga. S.S (Brush.) No IP65 OP=18Ga. S.S.(Paint.) IC=18Ga. CRS IP65 OA=Aluminum (Paint.) IA=Alum.(Paint.) IP65 IB=18Ga. S.S.(Brush.) IP65 IS=18Ga. S.S.(Paint.) IP65 DAMP LOCATION Lamp Type Fluorescent: Electronic Ballast <10% THD standard. RIF available. Lamps by others. Closed cell pvc or extruded silicone gaskets prevent air contaminants from entering room. ORDERING INFORMATION Product Family Phillips flat head screws with captive cage nuts Integrated switch allows light selection at 100%,70%,40% and 10% levels Inset extruded door available in anodized aluminum or white painted aluminum. Overlapping door frame available in aluminum, CRS and stainless steel. Frame fastened to housing via aircraft cable. REMOVABLE COVER; GASKETED TO HOUSING WITH (2) 7/8” DIA. K.O.’S ALUMINUM EXTRUDED INSET FRAME LED:Constant current Available in three standard color temperatures 3500˚K,4000˚K & 5000˚K. Other color temperatures available, consult factory. 20 gauge formed cold rolled steel housing with continuous seam welds. Aluminum and stainless steel option available. Manufactured in accordance with NSF standards. Cannot use with universal voltage option Consult factory for T5 availability Consult factory for lamp-ballast options ▲ Not available in 277V ● 2 lamp only DM1 = Dimming driver 1% E1 = Emerg. Bat. Pack (450 Lumens) * ◄♦ SD2 = Step Dim. Module(50-100%) ▲ E2 = Emerg. Bat. Pack (1100 Lumens) * ◄♦ SD3 = Step Dim. Module(25-50-100%)▲ EL1= Emerg. Bat. LED Low SD3A=Step Dim. Module(33-66-100%)▲EL2= Emerg. Bat. LED High PR = Program Rapid Start RF = RIF (Radio Interference Filter)* FZ = Fuse * TH = Torx Head screws (with center pin) NL = Fluorescent Night Light * TM = Tandem Mount LN = LED Night Light. Consult factory for available color/temperatures. Notes: Specifications and Dimensions are subject to change without notice. For additional options and dimensional details please consult your New Star Lighting Representative. For specific electronic ballast, specify brand and catalog number. A = .125 Prismatic Acrylic B = .125 Prismatic Polycarbonate C = .156 Prismatic Polycarbonate D = .187 Prismatic Polycarbonate LC3 = .125 White Frosted Poly. 5 = .187 Clear Temp.Glass

Based lense .250 Clear Polycarbonate/.125 Prismatic Acrylic - 4000K # LED BOARDS DELIVERED LUMENS * TAKE AN ADDITIONAL 20% OFF DELIVERED LUMENS WHEN SPECIFYING THE LC3 LENS