ALIANS CLAVICLE
8Pages

{{requestButtons}}

Catalog excerpts

ALIANS CLAVICLE - 1

ALIANS CL AVICLE P OLYA XIAL LOCKING FIXATION Precontoured and bendable implants Comprehensive range of plates: superior and anterior implants Pre-angled screws allowing a 20° polyaxial angulation

Open the catalog to page 1
ALIANS CLAVICLE - 2

A L I A N S CL AV I CL E Indications: Implants of the Alians Clavicle range are dedicated to the fixation of fractures, mal-unions, non-unions, and osteotomies of the clavicle in adults. Contraindications: • Serious vascular deterioration, bone devitalization, • Pregnancy. • Acute or chronic, local or systemic infections. • Lack of musculo-cutaneous cover, severe vascular deficiency touching the focus. • Insufficient bone quality preventing a good fixation of the screws into the bone. • Muscular deficit, neurological deficiency or behavioural disorders which could submit the osteosynthesis...

Open the catalog to page 2
ALIANS CLAVICLE - 3

T ECHNI C A L FE AT U R E S A PRECONTO UR ED IMPLA NT BENDABLE PLATES OPTIMIZED ANATOMICAL CONGRUENCE Some plates from ALIANS CLAVICLE range offer bending areas. It is possible to bend the plate with the bending irons (ANC218)* following the instructions below: > ending is only possible in the areas intended for this purpose, B > bendable area should be bent only once and in one A direction, > ending should not be performed excessively, B > he holes must be protected so as to avoid damaging of the T fixation. There is a risk of distortion of the holes when bending the plate. The design of...

Open the catalog to page 3
ALIANS CLAVICLE - 4

Surgical technique example with the medial lateral plate, Size 2 (CTDML2). The Alians Clavicle kit offers a range of self-limiting drill bits designed for the insertion of 03.5 mm screws, to avoid any risks of excessive penetration and to protect the subclavian artery. 1. Position the plate making sure that the “LAT” and “MED” marks are correctly matched. 2. Perform the drilling using the non threaded bent guide gauge (ANC191) and the self-limiting drill bits (see herein) into the medial oblong hole. 3. Insert the cortical screw (CT3.5Lxx) using the screwdriver part of the 2-in-1 instrument...

Open the catalog to page 4
ALIANS CLAVICLE - 5

Surgical technique example with the lateral plate, Size 2 (CTDL2).-) MONOAXIAL SURGERY 1. Secure temporarily the fracture using wires. Lock the fast guide (ANC193 or ANC194 depending on the operated side) onto the plate and position the latter above the fracture. -> POLYAXIAL SURGERY 2. In the oblong hole, drill (range of self-limiting drill bits or ANC089C) then directly read the drilling depth on the 027 mm non threaded bent guide gauge (ANC191) (cf a). Insert the cortical screw (CT3.5Lxx) using the screwdriver part of the 2-in-1 instrument (ANC083C) (cf b). If needed, readjust the...

Open the catalog to page 5
ALIANS CLAVICLE - 6

-) MEDIAL PLATES SUPERIOR MEDIAL PLATES Ref. Description CTDM1 Clavicle plate - Medial part - Size 1 - Right - 6 holes - L71 mm CTGM1 Clavicle plate - Medial part - Size 1 - Left - 6 holes - L71 mm CTDM2 Clavicle plate - Medial part - Size 2 - Right - 8 holes - L91 mm CTGM2 Clavicle plate - Medial part - Size 2 - Left - 8 holes - L91 mm SUPERIOR MEDIAL BENDABLE PLATES Ref Description CBTDM1 Bendable clavicle plate - Medial part - Size 1 - Right - 6 holes - L84 mm CBTGM1 Bendable clavicle plate - Medial part - Size 1 - Left - 6 holes - L84 mm CBTDM2 Bendable clavicle plate - Medial part -...

Open the catalog to page 6
ALIANS CLAVICLE - 7

SDT2.8L10 Locking screw - 02.8 rnrn - L10 rnrn Green anodized * Blue anodized. Fuchsia anodized. CORTICAL SCREWS* Description CT3.5L10 Standard cortical screw - 03.5 mm - L10 mm CT3.5L12 Standard cortical screw - 03.5 mm - L12 mm CT3.5L14 Standard cortical screw - 03.5 mm - L14 mm CT3.5L16 Standard cortical screw - 03.5 mm - L16 mm CT3.5L18 Standard cortical screw - 03.5 mm - L18 mm CT3.5L20 Standard cortical screw - 03.5 mm - L20 mm CT3.5L22 Standard cortical screw - 03.5 mm - L22 mm CT3.5L24 Standard cortical screw - 03.5 mm - L24 mm CT3.5L26 Standard cortical screw - 03.5 mm - L26 mm...

Open the catalog to page 7
ALIANS CLAVICLE - 8

ANC046C 02.0 mm non threaded guide gauge for 02.8 mm screws 1 ANC082C 2.0 mm quick coupling hexagonal prehensor screwdriver 1 ANC083C 2 in 1 : 2.5 mm hexagonal prehensor screwdriver - 03.5 mm countersink 1 ANC084 02.8 mm quick coupling countersink 1 ANC088C 02.0 mm quick coupling drill bit - L 125 mm 1 ANC089C 02.7 mm quick coupling drill bit - L 125 mm 1 ANC102 Length gauge for 02.8 mm screws 1 ANC103 2.0 mm hexagonal non prehensor screwdriver 1 ANC107 2.5 mm quick coupling hexagonal non prehensor screwdriver 1 ANC124 Length gauge for 03.5 mm cortical screws 1 ANC160 Handle for fast...

Open the catalog to page 8

All Newclip Technics catalogs and technical brochures

  1. PERIACTIV

    3 Pages

  2. Single Use kit

    12 Pages

  3. NATIV

    2 Pages

  4. ATLANTIC OW

    6 Pages

  5. ATLANTIC CW

    6 Pages

  6. FLATFOOT

    2 Pages

  7. Activ Ankle

    8 Pages

  8. ALIANS ULNA

    8 Pages

  9. FOREFOOT

    8 Pages

  10. ACTIVMOTION

    8 Pages

  11. INITIAL R

    8 Pages

  12. KEMIS

    4 Pages

  13. ALIANS ELBOW

    8 Pages