Catalog excerpts
ALIANS FOREARM FOREARM/CUTTING AND COMPRESSION DEVICE MONOAXIAL LOCKING SYSTEM Ulnar shortening osteotomy plate Rack-and-pinion compression device Ø2.8 mm interfragmentary cortical screw Low-profile locking forearm plates
Open the catalog to page 1ALIANS FOREARM The ALIANS FOREARM range of plates includes two types of plates designed for orthopaedic surgery and trauma treatment of forearm fractures: © ALIANS MIDSHAFT O ALIANS ULNA Locking plates for forearm shaft Locking plate for ulnar shortening fractures osteotomy ALIANS MIDSHAFT -) TRAUMA INDICATIONS O Fixation of forearm shaft fractures O Fixation of forearm shaft non-unions © 4 plates with 8, 9, 13 or 15 holes NNOVATION MEANS MOTION
Open the catalog to page 2A L I A N S FO R E A R M ALIANS ULNA Distal hole: fixed-angle (5°) INDICATION FOR SCHEDULED SURGERY The plate bears the mark ‘DISTAL’ for proper positioning Ulnar shortening osteotomy TECHNICAL FEATURES Anatomically contoured implant: the edges and tips of the implant are rounded to minimize soft tissue irritation. Fixed-angle slotted hole (50°) for Ø2.8 mm cortical screw Symmetrical plate Oblong slot for the double fixation of cortical screws Marks appearing on the implant: - Proximal and distal ends - Graduations for checking compression level MONOAXIAL FIXATION Ø3.5 mm cortical screw for...
Open the catalog to page 3ALIANS ULNA : CUTTING AND COMPRESSION DEVICE COMPONENTS The block should be chosen according to: : 2 blocks (ANC171 and ANC172) to choose the side of the resection (right or left) and the approach (lateral, dorsal or palmar/volar) Each block includes: - A written indication of the corresponding side / approach: depending on the chosen side, these indications help determine the appropriate block and assemble the cutting and compression device. - A rack-and-pinion system allowing for optimal compression of the osteotomy sites. - The side: right or left - The selected approach: lateral, dorsal...
Open the catalog to page 4Volar approach Left side 1. Position the plate on the most distal part of the ulna making sure that the “distal-proximal” marks are correctly matched. The approach used and positioning of the plate may be lateral, dorsal or palmar (volar). 2. Adjust and secure the plate onto the distal part of the ulna using two locking screws (SOT3.5Lxx). For this purpose, drill (ANC089C) and directly read the drilling depth on the guide gauge (ANC186). 3. To make the insertion of the SOT3.5Lxx locking screws easier, widen the drilling made in the first cortex using the hand reamer (ANC463). Repeat these...
Open the catalog to page 52 9. Remove the cutting guide to pull out the resected bone fragment. 10. Slightly loosen the two cortical screws (CT3.5Lxx) in the oblong slot so that the plate may be slid. 11. Insert the handle for compression (ANC170) through the drilling performed at step 6, and into the rack-and-pinion section of the block. Rotate the instrument (1) to perform compression of the osteotomy site (2). 12. While maintaining the compression, tighten up the cortical screws (CT3.5Lxx) into the proximal oblog slot. Compression level can be checked thanks to the graduations. 13. To maintain the compression,...
Open the catalog to page 6IM P L A N TS R EFE R EN CE S ALIANS ULNA PLATE ALIANS MIDSHAFT PLATES Symmetrical ostetomy plate for Ulna - Size 1 Forearm locking plate - Size 1 – 80 mm Forearm locking plate - Size 2 – 100 mm Forearm locking plate - Size 3 – 130 mm Forearm locking plate - Size 4 – 160 mm * Pink anodized * Blue anodized for ALIANS ULNA only Sterile screws are pink anodized. Remark: Please note that all implants are also available in sterile packaging. For screws, the Sosafe tube packaging is handy and easy to use. An ‘ST’ code is added at t
Open the catalog to page 7Non-contractual pictures. Quick coupling 2.0 mm hexagonal prehensor screwdriver Quick coupling 2.5 mm hexagonal prehensor screwdriver Ø2.7 mm quick coupling reamer Ø2.0 mm quick coupling drill bit - L125 mm Ø2.5 mm quick coupling drill bit - L125 mm Ø2.5 mm quick coupling hexagonal non-prehensor screwdriver Length gauge for Ø3.5 mm cortical screws Ø2.7 mm handle for Ulna cutting and compression device Left block for Ulna plate Right block for Ulna plate Ø2.7 mm guide gauge for Ø3.5 mm locking screws Ø2.7 mm guide gauge for Ø3.5 mm cortical screws Ø2.7 mm drill guide for Ulna Ø2.7 mm double...
Open the catalog to page 8All Newclip Technics catalogs and technical brochures
-
Why choose single use kits
1 Pages
-
INITIAL C™
12 Pages
-
PERIACTIV
3 Pages
-
ACTIVMOTION LIGAMENTO
4 Pages
-
ALIANS PROXIMAL HUMERUS
8 Pages
-
ALIANS CLAVICLE
8 Pages
-
Initial F™ - Lapidus kit
14 Pages
-
Single Use kit
12 Pages
-
ACTIVMOTION SIZE 2
4 Pages
-
NATIV
2 Pages
-
ATLANTIC OW
6 Pages
-
ATLANTIC CW
6 Pages
-
FOOTMOTION PLATING SYSTEM
8 Pages
-
FLATFOOT
2 Pages
-
Activ Ankle
8 Pages
-
FO OT M OT I O N
8 Pages
-
ALIANS ULNA
8 Pages
-
SURGICAL TECHNIQUE
2 Pages
-
ALIANS DISTAL RADIUS
8 Pages
-
FOREFOOT
8 Pages
-
ACTIVMOTION
8 Pages
-
INITIAL R
8 Pages
-
KEMIS
4 Pages
-
ALIANS ELBOW
8 Pages