Foot Plating System
12Pages

Reduced Size Foot Plating System

Indications and Contraindications INDICATIONS: The Nextremity Solutions Stratum RS Reduced Size Foot Plating System is intended for stabilization and fixation of small bone fragments in fresh fractures, revision procedures, joint fusion and reconstruction of small bones of the foot and ankle, particularly in osteopenic bone. CONTRAINDICATIONS: • Patient conditions including insufficient quantity or quality of bone and/or soft tissue. • Blood supply limitations and previous or active infections that may inhibit healing. • Surgical procedures other than for the indications listed. • Patients...

Reduced Size Foot Plating System The Stratum RS Reduced Size Foot Plating System is the newest addition to the Stratum family of plates. This next generation of reduced size anatomic locking plates that address stabilization and fixation of small bone fragments in fresh fractures, revision procedures, joint fusion and reconstruction of small bones of the foot and ankle, particularly in osteopenic bone. The fully sterile Stratum RS Reduced Size Foot Plating System includes innovative technology. The system has 18 distinctive plates (tined and tineless options) along with locking, nonlocking,...

Stratum RS Reduced Size Foot Plating System A Symphony for Foot and Ankle Repair® Straight Plates Peanut Plates Single Lisfranc Fusion Plates “Hockey Stick” Plat

Stratum RS Reduced Size Foot Plating System Plate Features: Tine Technology Stratum RS plates are made of Ti-6Al-4V ELI (Type 2 Anodized Titanium Alloy) Hands-Free Technique • Plate templates allow for pre-drilling of tine holes on one side of joint or fracture • No provisional K-wires required to hold plate in position once tines are inserted • Tines prevent plate from shifting once inserted • Three points of fixation in small footprint • Ability to manipulate small bones and/or segments of bone once tines are inserted Compression Through Tines • Joint can be compressed through tines, not...

Stratum RS Reduced Size Foot Plating System Plate Features: Compression Ramps Up to 3.5mm of Linear Compression • Surgeon dials in compression based on tactile response Bicortical Compression • Bicortical fixation with threaded wire prior to start of compression • Compression driven at the level of the plate mitigating moment forces on joint Pre-Assembled on Plate • Removable compression ramp allows for low-profile plate designs • Tabbed design allows for easy rem

Stratum RS Reduced Size Foot Plating System Plate Features: Alignment Caps Low Profile Alignment Caps with Tapered Edge • Easily slips under soft tissue • Pre-assembled to plates Quick Connection to Drill Tube • No thread-on requirement • Protects integrity of plate threads Drill Tube Doubles as Alignment Cap Removal Instrument • Allows to load screw on driver while removing Alignment Cap • Alignment Caps removed quickly and easily • Guides co-axial drilling to minimize cross-t

Stratum RS Reduced Size Foot Plating System Plate Features: In-Situ Contouring Plate Benders • Easily thread into plate after Alignment Caps are removed • Allows for in-situ contouring • Protects threads from deforming during plate bending • Two different lengths to allow for optimal grip when benders are in close proximity to one anoth

Stratum RS Reduced Size Foot Plating System Screw Options The Stratum RS Reduced Size Foot Plating System comes with a variety of screw options. The system uses sterile locking, non-locking, and multi-directional locking screws. Due to the design of the plate itself, variable-angle locking and non-locking screws can be used in any of the screw holes, with the exception of the slotted hole, which requires a 2.4mm non-locking screw. This versatility allows for multiple screw combinations based on surgeon preference. The Cobalt Chrome Multi-Directional Locking Screw allows for off-axis screw...

Stratum RS Reduced Size Foot Plating System Sterile/Disposable Instrument Kit Sterile/Disposable Instrument Kit • • • • • All components in kits are pre-sterilized Instrumentation has never been used, damaged, or worn prior to surgery Time and cost savings as sterilization before surgery is no longer necessary Complete sets at delivery minimizes time at the back table Plate templates are attached to the underside of each instrument kit lid Torque Limiting Handle 2NM Calibrated Drill with Sleeve 2.4mm Threaded Wire & Nut 2.4mm Threaded Olive Wires

This material is intended for health care professionals. Distribution to any other recipient is prohibited. For product information, including indications, contraindications, warnings, precautions, potential adverse effects and patient counseling information, see the package insert. This product brochure was developed in conjunction with health care professionals. This document is intended for surgeons and is not intended for laypersons. Each surgeon should exercise his or her own independent judgment in the diagnosis and treatment of an individual patient, A written surgical technique is...