FACET FIXX®

Product catalog summary

Overview: The FACET FIXX® system is designed for superior implant control and tactile response during screw implantation. It includes options for both transfacet and translaminar applications, featuring washer serrations for gripping the boney cortex and options for full-thread or lag screws.

Specifications:

TransFacet Screw System (TF): Available in 4.5 and 5.0mm diameters, with lengths from 25-50mm in 5mm increments.
TransLaminar Screw System (TL): Available in 4.5 and 5.0mm diameters, with lengths from 35-60mm in 5mm increments.

Design Features:

Washer undersurface prevents rotation without compromising cortical surface integrity.
Cannulated screws allow for minimal exposure and dissection.
Tapered minor diameter on screw tip ensures immediate thread engagement for precise placement.
Lag feature maximizes compression of the facet articulation process.
Washer angulation up to 28 degrees.
Double lead threads and self-tapping thread for secure attachment.
Bi-lobe feature with internal thread interface.

Procedures:

Insert K-Wire, then Tube #1.
Insert DTS Guide (Tube #2 & #3).
Drill (& Tap), then remove Tube #2.
Insert screw through DTS Guide.

Instrumentation: Surgeon-designed instruments with a locking feature to retain dilator tubes during the procedure.

Catalog excerpts

FACET FIXX® TransFacet/TransLaminar Screw System The system features superior implant control, excellent tactile response during screw implantation, washer serrations to grip the boney cortex, and full-thread or lag screw options for transfacet applications. 317-436-7801 [email protected] 14425 BERGEN BLVD, STE B NOBLESVILLE, IN 46060 70-021E, Rev D

Open the catalog to page 1

FACET FIXX® - TF TransFacet Screw System Partial Thread Washer undersurface designed to prevent rotation without compromising integrity of cortical surface Available in: 4.5 and 5.0mm Diameters 25-50mm Lengths (5mm increments) Tapered minor diameter on screw tip assures immediate thread engagement for precise Full Thread screw placement 28o Washer angulation up to 28o Double Lead Threads Cannulated screw allows for minimal exposure and dissection Self-Tapping Thread Secure attachment Bi-lobe feature with internal thread interface TransLaminar Screw System Partial Thread Lag feature maximizes...

Open the catalog to page 2

Surgeon designed instruments SIMPLE STEPS 1. Insert K-Wire, Then Tube #1 2. Insert DTS Guide (Tube #2 & #3) 3. Drill (& Tap), then Remove Tube #2 4. Insert screw through DTS Guide Locking feature retains dilator tubes during procedure

Open the catalog to page 3

FACET FIXX®

FACET FIXX®

Catalog excerpts

All Nexxt Spine catalogs and technical brochures