STAND ALONE CERVICAL SYSTEM Nexxt Matrixx®

Product catalog summary

Overview: The document provides technical specifications and procedural guidelines for the Nexxt Matrixx® Stand Alone Cervical System, a medical device used in spinal surgeries.

Specifications:

The system includes cellular scaffold technology with tailored topography for enhanced integration.
Available footprint sizes are 12x14x5-12mm, 14x16x5-12mm, and an optional 16x18x5-12mm.
Screw lengths are measured from the anterior to the posterior edge, with a 6-degree lordosis in all footprints.
Screw sizes include standard screws (Ø3.5 x 12-18mm) and rescue screws (Ø4.0 x 12-18mm).
Self-locking screws feature a one-step locking collet with angulation options of 12.5° ± 5° and 40° ± 5°.

Procedures:

Insert the interbody device.
Use the drill/awl for preparation.
Insert the screws.
Remove the inserter.

Key Instruments:

DTS Drill Guide for precise drilling.
Options for poly variable angle and straight fixed angle configurations.

Recommendations:

Ensure correct screw length selection based on the footprint.
Utilize the appropriate drill guide for optimal screw placement.

Catalog excerpts

STAND ALONE CERVICAL SYSTEM Nexxt Matrixx®-1

STAND ALONE CERVICAL SYSTEM Nexxt Matrixx® TAILORED TOPOGRAGPHY 317-436-7801 [email protected] 14425 BERGEN BLVD, STE B NOBLESVILLE, IN 46060 70-048E, Rev B

Open the catalog to page 1

STAND ALONE CERVICAL SYSTEM Nexxt Matrixx®-2

NOTE: Screw lengths are measured from the anterior edge of the footprint to the posterior edge. All footprints have 6o lordosis DTS DRILL GUIDE 1. INSERT INTERBODY 2. DRILL/AWL 3. INSERT SCREWS 4. REMOVE INSERTER SCREWS SIZES POLY variable angle Drill and Screw Inserter Options STRAIGHT stationary FIXED preset angle ONE-STEP LOCKING COLLET (Drill Shown

Open the catalog to page 2

STAND ALONE CERVICAL SYSTEM Nexxt Matrixx®

STAND ALONE CERVICAL SYSTEM Nexxt Matrixx®

Catalog excerpts

All Nexxt Spine catalogs and technical brochures