NICOS GROUP Inc. 80 Oak street, Norwood NJ 07648 Phone. 201 768 9501 Fax 201 768 9504 e-mail: [email protected] Sterilizing AUTOCLAVES We have scores of standard sized of Steam, Air/Steam mixture, Superheated Water, autoclaves, ranging from 150 liters (5.3 cu.ft) to 7,000 liters (141 cu.ft) . All autoclaves meet or exceed the latest cGMP requirements. Aside from the standard models, we are capable of manufacturing customized autoclaves which can satisfy any particular requirements, regarding the chamber size, performance, level of automation, etc. Here is an example of our capabilities: although the superheated water and air/steam mixture autoclaves are highly specialized units, we are able to manufacture an autoclave which can combine one of these two special cycles with the conventional steam sterilization cycle. Furthermore, we can even combine all of the three cycles mentioned above (steam, superheated water, and air/steam mixture sterilization) in one single unit. Below are just a few of our autoclave features: • The chamber and the door(s) of a standard autoclave are polished to a roughness average (RA) < 20 micro inches which exceeds the industry standard. Excellent steam distribution. All of our customers, during validation have achieved temperature deviation not exceeding ±0.1°C. • The Autoclaves are supplied with full jacket which is dimple welded to the chamber, unlike continuous channels used by other manufacturers. Autoclave line card

NICOS GROUP NICOS GROUP Inc. 80 Oak street, Norwood NJ 07648 Phone. 201 768 9501 Fax 201 768 9504 www.NicosGroup.com e-mail: [email protected] • The door frames are built in solid 316LSS. The door frames are manufactured with a dovetail shaped groove for the door sealing gasket. The door is sealed by pressurizing the gasket by sterile air or pure steam. The gasket is retracted into the groove when the pressurization is excluded without the need of pulling vacuum. • There are five different types of door systems available, which can satisfy any and all particular requirements. The most used...